78.4.2 INPUT-DISPS

Das Verb INPUT-DISPS wird nur für ein WRITE-READ verwendet und kann nicht am Betriebsterminal (AMT) eingegeben werden. Der Anwender sieht am AMT nur den folgenden Text mit anschließendem Stern, der für ihn die Eingabeaufforderung darstellt:

DISPLAYER-INPUT IN <Prozessorname> PLEASE:
*

Diese AMO-Ausgabe ist gleichzeitig eine Anzeige, daß das zuvor eingegebene Kommando ordnungsgemäß bearbeitet wurde.

Folgende Kommandos sind definiert:


CMD=	CHAR,CTYPE=<param>;
CMD=	COPY,CTYPE=DEF,[NAME=<string>],[AREA=<param>-<param>];
CMD=	COPY,CTYPE=DBL,[NAME=<string>];
CMD=	DEF,CTYPE=ADR,NAME=<string>,TYPE=ADR,ADR=<hex>-<hex>;
CMD=	DEF,CTYPE=ADR,NAME=<string>,TYPE=TBL,TBL=<string>
	,IDX=<number>,DISPLACE=<number>;
CMD=	DEF,CTYPE=LOGNAME,NAME=<string>,AREA=<param>
	,LEN=<number>,IDX=<number>&&<number>;
CMD=	DEL,CTYPE=DEF,[NAME=<string>],AREA=<param>;
CMD=	DIST,NO=<number>;
CMD=	DUMP,CTYPE=ADR,NAME=<string>,UNIT=<param>,NO=<number>;
CMD=	DUMP,CTYPE=DA,ADR=<hex>,UNIT=<param>,NO=<number>;
CMD=	DUMP,CTYPE=LOGNAME,NAME=<string>,IDX=<number>;
CMD=	E,FILE=<string>;
CMD=	END;
CMD=	EV,CTYPE=D,NO=<number>;
CMD=	EV,CTYPE=H,VAL=<hex>;
CMD=	FILE,FILE=<string>,[NO=<number>];
CMD=	LST,CTYPE=ADR,NAME=<string>,UNIT=<param>,NO=<number>;
CMD=	LST,CTYPE=DA,ADR=<hex>-<hex>,UNIT=<param>,NO=<number>;
CMD=	LST,CTYPE=DEF,[NAME=<string>],AREA=<param>;
CMD=	LST,CTYPE=INT,TYPE=CPBH;
CMD=	LST,CTYPE=INT,TYPE=BCA;
CMD=	LST,CTYPE=INT,TYPE=BCASA,SEL=HD,FILE=<string>;
CMD=	LST,CTYPE=INT,TYPE=BCASA,SEL=SCREEN,[DISPLACE=<number>],
	,[LEN=<number>],[CONTINUE=<param>];
CMD=	LST,CTYPE=INT,TYPE=BDTYT[,BDID=<hex>];
CMD=	LST,CTYPE=INT,TYPE=STA,SEL=LTG,LTG=<number>;
CMD=	LST,CTYPE=INT,TYPE=STA,SEL=LTU,LTG=<number>,LTU=<number>;
CMD=	LST,CTYPE=INT,TYPE=STA,SEL=BOARD,LTG=<number>,LTU=<number>,
	,SLOT=<number>;
CMD=	LST,CTYPE=LOGNAME,NAME=<string>,IDX=<number>;
CMD=	LST,CTYPE=SW,TYPE=<param>,SEL=CIR,LTG=<number>,LTU=<number>
	,SLOT=<number>,CCT=<number>[,SU=<number>,DI=<number>];
CMD=	LST,CTYPE=SW,TYPE=<param>,SEL=CRF,LTG=<number>,PAR1=<number>
	,PAR2=<number>;
CMD=	LST,CTYPE=SW,TYPE=<param>,SEL=DTI,LTG=<number>,DTI=<number>;
CMD=	LST,CTYPE=SW,TYPE=<param>,SEL=IDX,LTG=<number>,IDX=<number>;
CMD=	LST,CTYPE=SW,TYPE=<param>,SEL=LN,LTG=<number>
	,LN=<number>[,SU=<number>,DI=<number>];
CMD=	LST,CTYPE=SW,TYPE=<param>,SEL=LODEN,LODEN=<number>;
CMD=	LST,CTYPE=SW,TYPE=<param>,SEL=STNO,STNO=<key-num>,SVC=<param>;
CMD=	LST,CTYPE=SW,TYPE=<param>,SEL=LTU,LTG=<number>,LTU=<number>;
CMD=	LST,CTYPE=SW,TYPE=FREE,SEL=ALL,LTG=<number>;
CMD=	LST,CTYPE=SW,TYPE=FREE,SEL=LNPTH,LTG=<number>;
CMD=	LST,CTYPE=SW,TYPE=SZ,SEL=ALL,LTG=<number>;
CMD=	LST,CTYPE=SW,TYPE=SZ,SEL=BCH;
CMD=	LST,CTYPE=SW,TYPE=SZ,SEL=BUF,LTG=<number>;
CMD=	LST,CTYPE=SW,TYPE=SZ,SEL=CPB;
CMD=	LST,CTYPE=SW,TYPE=SZ,SEL=DEV;
CMD=	LST,CTYPE=SW,TYPE=SZ,SEL=LNPTH,LTG=<number>;
CMD=	P,PROCID=<param>;
CMD=	PATCH,CTYPE=ADR,NAME=<string>,UNIT=<param>
	,NO=<number>,VAL=<hex>;
CMD=	PATCH,CTYPE=DA,ADR=<hex>,UNIT=<param>
	,NO=<number>,VAL=<hex>;
CMD=	PATCH,CTYPE=LOGNAME,NAME=<string>,UNIT=<param>,
	,NO=<number>,VAL=<hex>,IDX=<number>,DISPLACE=<number>;
CMD=	SET,CTYPE=ADR,NAME=<string>,UNIT=<param>
	,NO=<number>,VAL=<hex>;
CMD=	SET,CTYPE=DA,ADR=<hex>-<hex>,UNIT=<param>
	,NO=<number>,VAL=<hex>;
CMD=	SET,CTYPE=LOGNAME,NAME=<string>,UNIT=<param>,
	,NO=<number>,VAL=<hex>,IDX=<number>,DISPLACE=<number>;

OpenScape 4000 V10, Band 1: AMO Beschreibungen, Servicedokumentation, Ausgabe 12, ID: P31003H31A0S107120020