3.5 Error Messages and Advisories

3.5.1 Error Messages

 
F01:
THE ACD FEATURE IS DEACTIVATED.
ACTIVATE IT WITH THE FOLLOWING COMMAND:
 
CHANGE-ZAND:TYPE=ACD,ACDALLOW=YES;
F02:
ROUTE SELECTION TABLE FOR RCG=@@@@ HAS ALREADY BEEN CREATED.
F03:
THERE IS NO DAY SHIFT SCHEME WITH DSNUM=@@@@.
CREATE IT WITH THE FOLLOWING COMMAND:
ADD-ACDRS:TYPE=DS,DSNUM=@@@@,SHIFT=<?>,ART=<?>,ARTDEF=<?>;
F04:
THE RCG=@@@@ IS NOT YET CONFIGURED AS A ROUTE CONTROL GROUP.
USE THE FOLLOWING COMMAND TO ADD THIS NUMBER
TO THE SET OF RESERVED 'RCG' INDICES:
CHANGE-ACDSD:TYPE=CAFRCG,RCG=@@@@,CAFDN=<?>;
F05:
CANNOT DELETE DAY SHIFT SCHEME DSNUM=@@@@ - IT IS STILL
REFERENCED IN THE ROUTE SELECTION TABLE (RS)
OR THE CALENDAR ROUTING TABLE (CR).
DISPLAY REFERENCES WITH THE FOLLOWING COMMANDS:
DISP-ACDRS:TYPE=RS; DISP-ACDRS:TYPE=CR;
F06:
CANNOT DELETE ROUTE SELECTION TABLE FOR RCG=@@@@.
IT IS STILL REFERENCED IN THE
DIRECTORY NUMBER INFORMATION TABLE (DNI).
DISPLAY REFERENCES WITH THE FOLLOWING COMMAND:
DISP-DNIT:TBL=DNI;
F07:
THERE IS NO ACD ROUTING TABLE WITH ART=@@@@.
CREATE IT WITH THE FOLLOWING COMMAND:
ADD-ACDRT:ART=@@@@,MAXSTEP=<?>;
F08:
MEMORY RESERVED FOR DAY SHIFTS SCHEMES IS INSUFFICIENT.
ALLOCATE ADDITIONAL MEMORY WITH THE FOLLOWING COMMAND:
ADD-DIMSU:ACDSHIFT=<?>;
F09:
THE PARAMETER 'ART' MUST BE SPECIFIED IF A NEW
SHIFT END TIME IS TO BE ADDED TO A DAY SHIFT SCHEME
(IF THE VALUE ENTERED FOR 'SHIFT'
DID NOT EXIST BEFORE IN THE GIVEN 'DSNUM')
F10:
THE END-OF-SHIFT TABLE (EOS) IS FULL.
IN ORDER TO ASSIGN THE VALUE EOS=YES TO A DAY SHIFT
AN OTHER DAY SHIFT HAVING EOS=YES MUST BE DELETED
OR BE RESET TO THE VALUE EOS=NO.
F11:
THE DAY SHIFT TABLE IS FULL.
NO MORE DAY SHIFT SCHEMES (DSNUM)
OR SHIFT END TIMES (SHIFT) MAY BE ADDED.
F12:
THERE IS YET NO ROUTE SELECTION TABLE SET UP
FOR ROUTE CONTROL GROUP RCG=@@@@.
F13:
CANNOT DELETE THE LAST SHIFT END TIME
(SHIFT=23-59) FROM A DAY SHIFT SCHEME.
F14:
THE SPECIFIED COMBINATION OF 'ART' AND 'EOS' IS ALREADY
PRESENT IN THE GIVEN DAY SHIFT SCHEME. NEW VALUES FOR
'ART' AND/OR 'EOS' MUST BE ENTERED TO CHANGE DATA.
F15:
INCORRECT VALUE FOR SHIFT HOURS WITHIN PARAMETER 'SHIFT'.
POSSIBLE VALUES: 0 TO 23
F16:
THE SHIFT END TIME (SHIFT) TO BE DELETED VIA ENTERING
ART=0 IS NOT PRESENT IN THE GIVEN DAY SHIFT SCHEME.
F17:
THE FIRST 15 ACD ROUTING TABLES (ART 1-15) ARE NOT
ASSIGNABLE TO DAY SHIFTS (SEE AMO ACDRT).
F18:
NOT NEEDED FOR ACD-G.
F19:
MEMORY RESERVED FOR CALENDAR ROUTING IS INSUFFICIENT.
ALLOCATE ADDITIONAL MEMORY WITH THE FOLLOWING COMMAND:
ADD-DIMSU:ACDCALEN=<?>;
F20:
COULD NOT CHANGE OR DELETE ENTRY BECAUSE THE
STARTING DATE ENTERED IS NOT PRESENT IN THE
ROUTE SELECTION TABLE SPECIFIED BY THE RCG.
F21:
THIS DATE IS ALREADY USED FOR CALENDAR ROUTING BY THE
ROUTE SELECTION TABLE BELONGING TO THE SPECIFIED 'RCG'
F22:
THE ENTERED DATE OR DATE RANGE IS INVALID.
F23:
CALENDAR ROUTING TABLE COULD NOT BE ADDED BECAUSE THERE IS
NO ROUTE SELECTION TABLE SET UP FOR THE SPECIFIED 'RCG'
F24:
CANNOT DELETE ROUTE SELECTION TABLE FOR RCG=@@@@.
IT IS STILL REFERENCED IN THE CALENDAR ROUTING TABLE (CR).
DISPLAY REFERENCES WITH THE FOLLOWING COMMAND:
DISP-ACDRS:TYPE=CR;
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.