6.3.1
ADD-ACMSM
This function is used to configure the ACL application communication parameters, for the ACL Manager.
Procedure Overview
Command Code
Parameter
ADD-ACMSM
[UNIT=<param>],APPLNO=<number>
|,TYPE=TRACE,ACLAPPL=<string>,PBXAPPL=<string>
,PROCID=<string>;
|,TYPE=ACLAPPL,ACLAPPL=<string>,PBXAPPL=<string>
,PROCID=<string>,ACCESS=<param>,[PASSWD=<string>]
|,[PACKAGE=Y],MAXSBYTE=<number>,MAXRBYTE=<number>;
|,[PACKAGE=N];
Examples
1.
Create a configuration for the host-based application "DECAPPL" and which enables message packaging.
Input:
ADD-ACMSM:A1,16,ACLAPPL,"DECAPPL","ACM","H1",CB,"DECPWD",Y,500,750;
Output:
Start- and End message
2.
Create a configuration for the host-based application "DICAPPL" and which disables message packaging.
Input:
ADD-ACMSM:A1,17,ACLAPPL,"DICAPPL","ACM","H1",CB,,N;
Output:
Start- and End message
3.
Create a configuration for the ACL Message Trace Function.
Input:
ADD-ACMSM:A1,18,TRACE,"TRACE","ACM","TRACEPRC";
Output:
Start- and End message
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.