7.2.4
DISPLAY-ACSU
This function makes it possible to output attendant console data.
If ATNDNO is entered, the data regarding the ATND are listed.
If parameter ATNDNO is not specified, the data of all the ATNDs existing in the system is listed.
Procedure Overview
Command Code
Parameter
DISPLAY-ACSU
[ATNDNO=<number>];
Example
The data for ATNDNO 298 is to be displayed
Input:
DISPLAY-ACSU:ATNDNO=298;
Output:
+------------------------------------------------------------+
| ASSIGNED DATA FOR ATTENDANT TERMINAL |
+----------+------------------------++--------+--------------+
| ATNDNO | 298 || ACTYPE | ACWIN |
| ===== || ATNDGR | 0 |
| --------------------------------- || PEN | 1-2- 25- 5 |
| SRCGRP | 0 || NNO | 7- 1- 21 |
| DPLN | 0 || SPDC1 | 0 |
| COS | 1 || SPDC2 | 2 |
| LCOSV | 1 || LANG | GER |
| CLASSMRK | G711 G729 || EOVR | NO |
| | || SATNDNO| NO |
| PUBNUM | 7220 || | |
| TON | NATIONAL || | |
| NPI | ISDN || | |
| STNOOOS | 456327 || | |
| STNOAPE | || | |
| AMOALTRT | NO ||CLUSTID | 5 |
+------------------------------------------------------------+
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.