7.4 Error Messages and Advisories

7.4.1 Error Messages

 
F01:
ATNDNO <xxxxxx> NOT ASSIGNED
F02:
ATNDNO <xxxxxx> ALREADY ASSIGNED
F03:
PEN OCCUPIED OR SIGNED OFF
F06:
THE ATTENDANT CONSOLES CANNOT BE ADDED; THE CONTRACTED NUMBER OF
FLEX+TDM LICENSES <max> IS REACHED.
PLEASE USE DISP-CODEW FOR DISPLAY OF THE CONTRACTED
FEATURE PACKAGES.
PLEASE CONTACT YOUR SERVICE CENTER IF YOU WISH TO ADD MORE
ATTENDANT CONSOLES.
F08:
PEN <gg-u-sss-cc> IS ’SIGNED_OFF’.
RELEASE WITH AMO BCSU OR USE AN OTHER PEN.
F09:
MAXIMUM NUMBER OF ATNDS REACHED, ATNDNO <xxxxxx> NOT ASSIGNED
F10:
ATNDNO <xxxxxx> IS STILL IN AN ATND GROUP; DELINK WITH AMO VFGR
F11:
ATNDNO <xxxxx> CANNOT BE PROCESSED. IT IS STILL REFERENCED IN THE ACD ROUTING TABLE <art-no>.
DELETE THE ATND BY AMO ACDRT FROM ROUTING TABLES BEFORE REPEATING THIS COMMAND.
F15:
PEN ERROR; PERMISSIBLE RANGE FOR LTG: 1-<ltg_max>
F16:
CHANGING OF THE CALLING NUMBER IS ALLOWED BY A SINGLE VALUE FOR ATNDNO ONLY
F17:
ATNDNO <xxxxxx> ENTERED MORE THAN ONCE
F19:
NO ADVANCE PROVISION FOR ATNDNO <xxxxxx> IN DIAL PLAN
F20:
NO ENTRY FOR VIRTUAL NODE ID IS EXISTING.
ADD NO LESS THAN ONE ENTRY WITH AMO KNDEF, TYPE=OWN.
F21:
INADMISSIBLE VALUE FOR LTU ENTERED IN PEN PARAMETER
F24:
LEVEL <x> OF NNO MAY NOT EXCEED <max_val>
F25:
PEN ERROR; SLOT FORMALLY INCORRECT
F26:
PEN ERROR; PERMISSIBLE RANGE FOR CIRCUIT NUMBER: <0-cct_max>
F27:
NO <bd-type> MODULE ASSIGNED AT THE PEN ENTERED
F29:
INSUFFICIENT SUBUNIT RESOURCES FOR ATNDNO <xxxxxx>
F30:
INSUFFICIENT DEVICE MEMORY FOR ATNDNO <xxxxxx>
F31:
ATNDNO <xxxxxx>: NO MEMORY AVAILABLE FOR DEVICE SEARCH (RULO)
 
(AMO DIMSU: PARAMETER <param>)
F32:
THE SPECIFIED CLASS OF SERVICE DOES NOT HAVE UNRESTRICTED OUTWARD TOLL AND TIE ACCESS
F33:
THE CLASS OF SERVICE SPECIFIED IS NOT ASSIGNED
F35:
NNO IS NOT DEFINED IN THE VIRTUAL NODE TABLE (AMO KNDEF)
F36:
LTG <ltg> NOT ASSIGNED
F37:
LTU <ltu> NOT ASSIGNED
F38:
NO MODULE HAS BEEN ASSIGNED FOR THE SPECIFIED PEN
F39:
ATNDNO <xxxxxx>: INVALID COMBINATION OF NPI=<npi> AND TON=<ton>
F40:
INSUFFICIENT USER INDEX FOR ATNDNO <xxxxxx> (AMO DIMSU: PARAMETER STN)
F41:
CLASSMRK: ’INIT’ AND/OR ’NONE’ CAN ONLY BE SET EXCLUSIVELY.
F42:
STNOOOS ^xxxxxxxxxxxxxxxxxxxxx^ DOES NOT LEAD TO A VALID DAR.
F43:
STNOAPE ^xxxxxxxxxxxxxxxxxxxxx^ DOES NOT LEAD TO A VALID DAR.
F44:
STNOOOS ^xxxxxxxxxxxxxxxxxxxxx^ CAN NOT BE THE SAME AS ATNDNO.
F45:
STNOAPE ^xxxxxxxxxxxxxxxxxxxxx^ CAN NOT BE THE SAME AS ATNDNO.
F46:
STNOOOS COULD NOT BE ADDED BECAUSE THERE IS NO ENOUGH MEMORY INCREASE MEMORY VIA ADD-DIMSU:ALTROUT=<?>;
F47:
STNOAPE COULD NOT BE ADDED BECAUSE THERE IS NO ENOUGH MEMORY INCREASE MEMORY VIA ADD-DIMSU:ALTROUT=<?>;
F48:
THE LCR CLASS OF SERVICE SPECIFIED IS NOT ASSIGNED
F49:
THE CGW BOARD CONFIGURATION DATA HAS NOT YET BEEN SET UP
( ADD-CGWB:LTU=@@,SLOT=@@@,SMODE=NORMAL)
F50:
THE ATTENDANT CONSOLES CANNOT BE ADDED; THE CONTRACTED NUMBER
THE PACKAGE COMSCENDO SECURITY LICENSE <xxxxxx> IS REACHED.
PLEASE USE DISP-CODEW FOR DISPLAY OF THE CONTRACTED FEATURE PACKAGES.
F51:
CGW MODULE IS CURRENTLY DEFINED AS A STANDBY BOARD, WHICH CANNOT BE USED FOR ACWINIP DEVICE CONFIGURATION
( DISP-HFAB:MTYPE=STMIHFA2,LTU=<xx>,SLOT=<xxx>; )
F52:
HMUSIC <xxx> IS NOT YET ASSIGNED ( ADD-RCSU:RECAPL=HMUSIC, )
F53:
<xxxxxxxxxxxxx> DPLN <xx> IS NOT ALLOWED FOR NODE <xxxxxxxxxxx>.
F54:
FOR PARAMETER IPPASSW EITHER 'NONE' OR AT LEAST
6 ALPHA-NUMERICAL CHARACTERS MUST BE ENTERED
F55:
THE ATTENDANT CONSOLES CANNOT BE ADDED; THE CONTRACTED NUMBER OF
FLEX LICENSES <xxxxxxxx> IS REACHED.
PLEASE USE DISP-CODEW FOR DISPLAY OF THE CONTRACTED FEATURE PACKAGES.
PLEASE CONTACT YOUR SERVICE CENTER IF YOU WISH TO ADD MORE ATTENDANT CONSOLES.
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.