7.4.2 Advisories


H01:	ATNDNO <xxxxxx> IS STILL ASSIGNED AS A HOTLINE OR OFFHOOK INTERCEPT DESTINATION
H02:	ATNDNO <xxxxxx> NEEDS TO BE ASSIGNED TO AN ATND GROUP
H03:	ATNDNO <xxxxxx>: TON AND NPI ARE IGNORED BECAUSE NO VALUE FOR PUBNUM IS EXISTING
H05:	THE CONTRACTED NUMBER OF FLEX LICENSES IS EXCEEDED.FLEX LICENSE IS MARKED AS TRIAL ENTITY.THE FEATURE FLEX LICENSE WILL BE DEACTIVATED,IF TRIAL MODE EXPIRES WITHOUT SUFFICIENT LICENSES.
H06:	FOR THE ATTENDANT CONSOLE <xxxxxx> NO ALTERNATE ROUTING NUMBER FOR OOS IS CONFIGURED,BUT THE ACTIVATION OF FEATURE ALTERNATE ROUTING HAS BEEN ALREDY DONE. PLEASE CONFIGURE SUBSEQUENTLY EITHER WITH AMO APRT A SOURCEGROUP OR WITH AMO ACSU A SUBSCRIBER INDIVIDUAL ALTERNATE ROUTING NUMBER FOR OOS.
H07:	ATNDNO @@@@@@@@@@@@: IPCODEC,DMCALLWD AND IPPASSW ARE IGNORED BECAUSE ATNDNO IS NOT TYPE OF ACWMQIP OR ACW2QIP.
H08:	ATNDNO @@@@@@@@@@@@: SECLEVEL IS IGNORED AS TDM AC SECURITY LEVEL CAN NOT BE SET TO STANDARD OR CIPHER.
H09:	SECLEVEL CHANGE WILL BE INITIATED AFTER DEACTIVATION AND RE-ACTIVATION OF THE SUBSCRIBER (RESTART-DSSU: TYPE=PEN OR TYPE=STNO)
H10:	Download of changed NEWNO and/or IPPASSW to the modules will be initiated after deactivation and re-activation of the circuit. ( RESTART-DSSU:TYPE=PEN,PEN1=<1>-<1-15,17-99>-@@@-@@@; )
H11:	NNO is ignored if VNR active.
H12:	ATNDNO @@@@@@@@@@@@: SECLEVEL IS IGNORED AS HFA AC SECURITY LEVEL CAN NOT BE SET TO STANDARD OR TRADITIONAL.
H13:	ATNDNO @@@@@@@@@@@@: SECLEVEL IS SET TO TRADITIO AS NO OTHER SECLEVEL IS ALLOWED FOR AC4.
H14:	ATNDNO @@@@@@@@@@@@: SECLEVEL IS IGNORED AS AC4 SECURITY LEVEL CAN ONLY BE SET TO TRADITIO.

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.