9.2.6 DISPLAY-AFR

Displaying the FAMAFR parameter lists. Unless the branch parameter PAR is specified, both the parameter list and the fault pair list of the specified LDU FAMAFR will be displayed. Unless the parameter LDU is specified, the parameter lists and/or the fault pair lists of all 3 FAMAFRs will be displayed.

Procedure Overview


Command Code	Parameter
DISPLAY-AFR	[LDU=<param>],[PAR=<param>];

Example

Displaying the parameter list and the fault pair list of FAMAFR2

Input:

DISPLAY-AFR:AFR2;

Output:

FAMAFR2
———————
AUTOMATIC FAULT REPORT = ON
PRINTOUT AT EXCHANGE = OFF

PARAMETER LIST
============== PARM VALUE
---- ----
PRIORITY SETTING (HIGH/EQU=TRANSMIT, LOW=STORE) PRI = 6
MAX. NUMBER OF HIGH PRIORITY FAULTS DURING FSUPV MAXF = 10
MAX. NUMBER OF LOW PRIORITY FAULTS DURING FSUPV MAXFL = 20
SUPERVISION TIME FOR MAXF AND MAXFL FSUPV = 60 [MM]
FAULT MEMORY OCCUPANCY LEVEL FOR TRANSMIT SETUPLT = 90 [%]
START OF FAULT TRANSMISSION TO NCC TRSTART = 12-00 [HH-MM]
PERIOD BETWEEN REPORTS IN DAYS PERIOD = 02 [TT]
MAXIMUM RETRANSMISSION LIMIT RETRLT = 9
ACTIVATION TIME AFTER SWITCH OFF THROUGH AVALANCHE ACTTIME = 00 [MM]

TABLE OF FAULT PAIRS
====================

+======+==================+==================+===============+
| | START OF FAULT | END OF FAULT | |
+======+=======+==========+=======+==========+=====+=========+
| FINO | FNUM | FACTION | ENUM | EACTION | COMP| FSUPV |
+======+=======+==========+=======+==========+=====+=========+
| 1 | F5388 | OUTSERV | F5389 | INSERV | 1 | 10 |
+------+-------+----------+-------+----------+-----+---------+

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.