9.2.7 OUTPUT-AFR

Outputting the status information of an LDU FAMAFR in a list. If no parameter is specified, the status information of all 3 FAMAFRs will be output.

Procedure Overview


Command Code	Parameter
OUTPUT-AFR	; [LDU=<param>];

Example

Outputting the LDU FAMAFR2 status information

Input:

OUTPUT-AFR:AFR2;

Output:

LDU FAMAFR2: STATUS INFORMATION
===================================

CONNECTION ESTABLISHED : YES
LAST CONNECTION SETUP GOOD : YES
CONNECTION FAULT REPORTED : NO
FAULT AVALANCHE OCCURRED : NO
DISK ACCESS POSSIBLE : YES
FAULTS STORED : 20
FAULT MEMORY OCCUPANCY LEVEL : 12 [%]
CONNECTING PATHS PROVIDED : FAMAFR2

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.