17.3.4 DISPLAY-APRT

•

Displays the configured AP net tables sorted by LTU

•

The IP routing table data can be displayed for either the STMI or the NCUI boards by using the parameter MTYPE.
For the STMI boards the routing table willl be displayed only once followed by the information on which LTU/SLOT the STMI boards are configured.
If the parameter MTYPE is not entered the IP routing tables will be displayed for all STMI and NCUI boards, starting with the STMI boards.

•

TYPE=SURV

CONF=ROUTER: displays for all configured routers the router number, the address of the SL100 router and the address of the survivability router.
CONF=AP: Displays which AP is configured for survivability on which particular router.

•

TYPE ALTROUT:

Displays the alternate routing table data for a particular source group index or for all source group indices if no value is entered for the source group parameter.

•

TYPE ALTERR:

Displays the alternate routing on error table data for a particular source group index or for all source groups if no value is entered for the source group parameter.

Procedure overview


Command Code	Parameter
DISPLAY-APRT	[TYPE=APNET],[LTU=<number>];
	\| [TYPE=ROUTTBL],
	[MTYPE=STMI];
	\| [MTYPE=NCUI],[LTU=<number>];
	\| [TYPE=SURV],
	CONF=ROUTER,[ROUTERNO=<number>];
	\| CONF=AP,[LTU=<number>];
	\| [TYPE=ALTROUT],[SRCGRP=<number>];
	\| [TYPE=ALTERR],[SRCGRP=<number>];

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 20, ID: P31003H31A0S107207620

© 05/2026 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.