17.3.5 REGENERATE-APRT

•

Regenerates the configured AP net table sorted by LTU

•

The IP routing table data can be regenerated for either the STMI or the NCUI boards by using the parameter MTYPE. If parameter MTYPE is not entered the IP routing tables will be regenerated for all STMI and NCUI boards, starting with the STMI boards.
For the STMI boards a change command of AMO APRT will be generated, because the actual configuration of those boards is done by AMO BCSU. Although the AMO will not generate commands for IP routing tables that do contain only default values can force the AMO to regenerate those by entering a value for the LTU parameter.

•

TYPE=SURV

If the CONF parameter is not entered the data for all configured routers followed by the the commands for configuring the APs for survivability are generated, otherwise only the specified commands are generated.

•

TYPE=ALTROUT:

Regenerates the alternate routing table data for a particular source group index or for all source group indices if no value is entered for the source group parameter.

•

TYPE ALTERR:

Regenerates the alternate routing on error table data for a particular source group index or for all source groups if no value is entered for the source group parameter.

Overview of Procedures


Command Code	Parameter
REGENERATE-APRT	[TYPE=APNET],[LTU=<number>];
	\| [TYPE=ROUTTBL],
	[MTYPE=STMI];
	\| [MTYPE=NCUI],[LTU=<number>];
	\| [TYPE=SURV],
	[CONF=ROUTER],[ROUTERNO=<number>];
	\| [CONF=AP],[LTU=<number>];
	\| [TYPE=ALTROUT],[SRCGRP=<number>];
	\| [TYPE=ALTERR],[SRCGRP=<number>];

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.