19.4
Parameter Description
APSTYP
Denotes the APS for which the SP number is to be changed.
Type of Input
:
Single value, mandatory
Possible Values
:
AMOCODE, AMOTEXT, RESCODE
FILE
Name of MML command file
The AMO checks whether the file is on the hard disk.
If this is not the case, parameter FILE is prompted.
Type of Input
:
Single value, mandatory
Possible Values
:
Syntactically correct DMS file name
SP
New SP number
In principle any SP number can be entered; for safety reasons the overwritten number is output in an advisory on the screen.
Type of Input
:
Single value, mandatory
Possible Values
:
17-digit SP number
UNIT
Name of hardware module
Type of Input
:
Single value, mandatory
Possible Values
:
A1
= ADS
BP
= SWU
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.