21.3.2 CHANGE-ATCSM

In case of a Hipath 4000 v2.0 there don't exist synchrone or asynchrone V24 - Lines.

•

An allocation can be changed by means of the functions ’delete’ and ’add’.

•

The specified device or the devices allocated to a device type can also be activated.

•

When the action ’change’ is executed, any existing line allocations of the corresponding device or device type are cancelled.

Procedure Overview


Command Code	Parameter
CHANGE-ATCSM	[UNIT=<param>]
	,CFIG=TYPE,DEVTYPE=<param>,[CRLF=<hex>]
	,[FF=<hex>],[USERGD=<hex>],[STATXBLK=<hex>]
	,[STOTXTBL=<hex>],[VATRNORM=<hex>]
	,[VATRDARK=<hex>],[CRCHAR=<hexl>]
	,[LNPERSCR=<decimal>],[CHPERLN=<decimal>];

	\|,CFIG=DEV,TYPENO=<decimal>,[TERMDESC=<param>]
	,[CHPERLN=<decimal>],[CNTRLNA=<hex>]
	,[T=<decimal>],[ANSLNT=<hex>],[ANSLN=<hex>]
	,[ECHOCHAR=<hex>],[FILLWTPR=<hex>]
	,[FILLCNT=<decimal>],[CNTRLND=<hex>]
	,[TFOUT=<hex>],[TFIN=<hex>],[DISDELN=<hex>]
	,[FRAMEFL=<hex>],[PARERR=<hex>]
	,[OVERFL=<hex>],[DAOUTT=<decimal>]
	,[DAINT=<decimal>],[RSVT=<decimal>]
	,[INTOUTT=<decimal>],[DIALT=<decimal>]
	,[PASSEXCL=<hex>],[PASSRES=<hex>];

Example

Change the device type.

Input:

CHA-ATCSM:UNIT=A1,CFIG=TYPE,DEVTYPE=PT88,CRLF=0D0A;

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.