21.4
Parameter Description
ALSEL
Allocation selection (device type or line)
Branching parameter
Type of Input
:
Single value, mandatory
Possible Values
:
TYPE
Device type
LN
Line
ANSLN
State of "answer" line after activation
Type of Input
:
Single value, optional
Possible Values
:
00 - FF
Default Value
:
00
ANSLNT
"Answer" line to be tested
Type of Input
:
Single value, optional
Possible Values
:
00 - FF
Default Value
:
04
CFIG
Configuration selection
Branching parameter
Type of Input
:
Single value, mandatory (ADD, DELETE, CHANGE)
Single value, optional (DISPLAY)
Possible Values
:
DEV
Device
TYPE
Device type
CHPERLN
Number of characters per line
line length (configuration)
Type of Input
:
Single value, optional
Possible Values
:
0 - 132 (for CFIG=TYPE)
0 - 999 (for CFIG=DEV)
Default Value
:
80
CNTRLNA
Value of control line when taking in service
Type of Input
:
Single value, optional
Possible Values
:
00 - FF
Default Value
:
F8
CNTRLND
Value of control line when taking in service
Type of Input
:
Single value, optional
Possible Values
:
00 - FF
Default Value
:
02
CRCHAR
Command request character
Type of Input
:
Singel value, optional
Possible Values
:
Even number of hexadecimal digits or 0
(0 stands for no control character sequence)
Default values, depending on the device type
PT88 0
QUME-ONLY-SCREEN 0
QUME-ONLY-PT88 0
QUME-SCRE-AND-PT88 0
PC-D-ONLY-SCREEN 03 (ETX)
PC-D-ONLY-PT88 0
PC-D-SCRE-AND-PT88 03 (ETX)
ASCII-TRANSP 0
EBCDIC-TRANSP 0
CRLF
Carriage return, line feed
Type of Input
:
Single value, optional
Possible Values
:
Even number of hexadecimal digits or 0
(0 stands for no control character sequence)
Default values, depending on the device type
PT88 0D0A
QUME-ONLY-SCREEN 0D0A
QUME-ONLY-PT88 0D0A
QUME-SCRE-AND-PT88 0D0A
PC-D-ONLY-SCREEN 0D0A
PC-D-ONLY-PT88 0D0A
PC-D-SCRE-AND-PT88 0D0A
ASCII-TRANSP 0D0A
EBCDIC-TRANSP 0D0A
DAINT
Data input supervision time
Type of Input
:
Single value, optional
Possible Values
:
0 - 1310 seconds
(0 stands for no monitoring)
Default Value
:
120
DAOUTT
Data output supervision time
Type of Input
:
Single value, optional
Possible Values
:
0 - 1310 seconds
(0 stands for no monitoring)
Default Value
:
600
DEVTYPE
Device type designation
Type of Input
:
Single value, mandatory
Possible Values
:
PT88
QUOSC
(QUME-ONLY-SCREEN)
QUOPT
(QUME-ONLY-PT88)
QUSCAPT
(QUME-SCRE-AND-PT88)
PCOSC
(PC-D-ONLY-PT88)
PCSCAPT
(PC-D-SCRE-AND-PT88)
ASC
(ASCII-TRANSP)
EBC
(EBCDIC-TRANSP)
RSV1
RSV2
RSV3
DIAIND
Dialog mode indicator
Type of Input
:
Single value, optional
Possible Values
:
Y, N
Default values, depending on the device type
PT88 N
QUME-ONLY-SCREEN Y
QUME-ONLY-PT88 N
QUME-SCRE-AND-PT88 Y
PC-D-ONLY-SCREEN Y
PC-D-ONLY-PT88 N
PC-D-SCRE-AND-PT88 Y
ASCII-TRANSP Y
EBCDIC-TRANSP Y
DIALT
Dialog supervision time
Type of Input
:
Single value, optional
Possible Values
:
0 - 1310 seconds
(0 stands for no monitoring)
Default Value
:
120
DISDELN
Display in del.line when lines empty
if no input characters exist
Type of Input
:
Maximum of 2 linked single values, optional
Possible Values
:
00 - FF
Default Value
:
0D&0A
(definition: CR&LF)
ECHOCHAR
Control character to get terminal out of standby mode
Type of Input
:
maximum of 2 linked single values, optional
Possible Values
:
00 - FF
Default Value
:
00&00
FF
Form feed
Type of Input
:
Single value, optional
Possible Values
:
Even number of hexadecimal digits or 0
(0 stands for no control character sequence)
Default values, depending on the device type
PT88 0C
QUME-ONLY-SCREEN 0C
QUME-ONLY-PT88 0C
QUME-SCRE-AND-PT88 0C
PC-D-ONLY-SCREEN 0C
PC-D-ONLY-PT88 0C
PC-D-SCRE-AND-PT88 0C
ASCII-TRANSP 0C
EBCDIC-TRANSP 0C
FILLCNT
Input of how often fill characters are to be sent
Type of Input
:
Single value, optional
Possible Values
:
0 - 99
Default Value
:
0
FILLWTPR
Fill character, waiting for printer
Type of Input
:
Single value, optional
Possible Values
:
00 - FF
Default Value
:
00
FRAMEFL
Start or stop step fault threshold (frame flutter)
Type of Input
:
Single value, optional
Possible Values
:
0 - 65535
Default Value
:
65535
INOUTT
Supervision time for interruption to data output
Type of Input
:
Single value, optional
Possible Values
:
0 - 1310 seconds
(0 = no supervision)
Default Value
:
600
LDEVNAME
Logical device name
Type of Input
:
Single value, mandatory
Possible Values
:
CON1 - CON6 Console
PR1 - PR4 Lineprinter
LN
Physical line number
Type of Input
:
Single value, mandatory
Possible Values
:
8, 9, 16, 17, 24, 25
8 - 63
(Line 8 of module A1 cannot be allocated by means of AMOs)
LNPERSCR
Number of lines per screen or page
Type of Input
:
Single value, optional
Possible Values
:
0 - 64
Default Value
:
24
OPMODE
Operating mode for power supply on switch on
Type of Input
:
Single value, optional
Possible Values
:
Y, N
Default Value
:
N
OVERFL
Threshold value for reporting the loss of characters
Type of Input
:
Single value, optional
Possible Values
:
0 - 65535
Default Value
:
65535
PARERR
Threshold value for reporting parity errors
Type of Input
:
Single value, optional
Possible Values
:
0 - 65535
Default Value
:
65535
PASSEXCL
Password exclusion class - so that protected data outputs are not aborted
Type of Input
:
Single value (ADD)
2 combined single values (CHANGE)
1st single value old password
2nd single value new password
optional
Possible Values
:
00000000 , ... , FFFFFFFF
Default Value
:
Available
PASSRES
Password for the reservation of a TTY device
Type of Input
:
Single value (ADD)
2 combined single values (CHANGE)
1st single value old password
2nd single value new password
optional
Possible Values
:
00000000 , ... , FFFFFFFF
Default Value
:
Available
RSVT
Reservation supervision time
Type of Input
:
Single value, optional
Possible Values
:
0 - 1310 seconds
(0 stands for no monitoring)
Default Value
:
300
STATXBLK
Start text block (control character sequence)
Type of Input
:
Single value, optional
Possible Values
:
Even number of hexadecimal digits or 0
(0 stands for no control character sequence)
Default values, depending on the device type
PT88 0
QUME-ONLY-SCREEN 0
QUME-ONLY-PT88 1B60
QUME-SCRE-AND-PT88 1B40
PC-D-ONLY-SCREEN 0
PC-D-ONLY-PT88 1B60
PC-D-SCRE-AND-PT88 1B40
ASCII-TRANSP 0
EBCDIC-TRANSP 0
STATXBLK
Start text block (control character sequence)
Type of Input
:
Single value, optional
Possible Values
:
Even number of hexadecimal digits or 0
(0 stands for no control character sequence)
Default values, depending on the device type
PT88 0
QUME-ONLY-SCREEN 0
QUME-ONLY-PT88 1B61
QUME-SCRE-AND-PT88 1B41
PC-D-ONLY-SCREEN 0
PC-D-ONLY-PT88 1B61
PC-D-SCRE-AND-PT88 1B41
ASCII-TRANSP 0
EBCDIC-TRANSP 0
T
Indicates the permissible time period during which the message
’activated’ must be identified
Type of Input
:
Single value, optional
Possible Values
:
1 - 1310 seconds
Default Value
:
1
TERMDESC
Terminal description
Type of Input
:
Single value, maximum of 4 linked single values,
optional
Possible Values
:
SIMPLEX
(SIMPLEX-TERM)
ECHO
(ECHOING-MODE)
ACOL
(ACT-CONTR-LEAD)
DEACOL
(DEACT-CONTR-LEAD)
ARCVCO
(ACT-WITH-RCV-CONTR)
PRTYPCO
(PRINT-TYPE-CONTR)
RXBUFTR
(RX-BUF-TREAT)
Default Value
:
ECHO&ARCVCO
The value RXBUFTR ( End Device with Receive Buffer Control ) is relevant only in the case that a terminal with parallel printer has been configurated or the mounted printer has not been configurated on XON/XOFF-protocol.
TFIN
Type face control for input
Type of Input
:
Maximum of 4 linked single values, optional
Possible Values
:
00 - FF
Default Value
:
0D
(definition: no control)
TFOUT
Type face control for output
Type of Input
:
Maximum of 4 linked single values, optional
Possible Values
:
00 - FF
Default Value
:
0D
(definition: no control)
TYPE
Choice of configuration or allocation
Branching parameter
Type of Input
:
Single value, mandatory (DELETE, ADD)
Single value, optional (DISPLAY)
Possible Values
:
CFIG
Configuration
ADD
Allocation
TYPENO
Number of logical line type
Type of Input
:
Single value, mandatory
Possible Values
:
1 - 8
(device 1 with UNIT A1 cannot be configured with AMOs)
(TYPENO 8 = [call charge computer] cannot be allocated to any device type)
(TYPENO 7 can be allocated only to device type PT88)
UNIT
Functional system unit ie. server code
Type of Input
:
Single value, optional
Possible Values
:
A1 (ADMINISTRATION and data server 1)
Default
Value
:
A1
USERGD
User guide (control character sequence)
Type of Input
:
Single value, optional
Possible Values
:
Even number of hexadecimal digits or 0
(0 stands for no control character sequence)
Default values, depending on the device type
PT88 0
QUME-ONLY-SCREEN 0
QUME-ONLY-PT88 0
QUME-SCRE-AND-PT88 0
PC-D-ONLY-SCREEN 0
PC-D-ONLY-PT88 0
PC-D-SCRE-AND-PT88 0
ASCII-TRANSP 0
EBCDIC-TRANSP 0
VATRDARK
Invisible characters
(visual attribute dark, control character sequence)
Type of Input
:
Single value, optional
Possible Values
:
Even number of hexadecimal digits or 0
(0 stands for no control character sequence)
Default values, depending on the device type
PT88 0
QUME-ONLY-SCREEN 1B4731
QUME-ONLY-PT88 0
QUME-SCRE-AND-PT88 1B4731
PC-D-ONLY-SCREEN 1B5B386D
PC-D-ONLY-PT88 0
PC-D-SCRE-AND-PT88 1B5B386D
ASCII-TRANSP 0
EBCDIC-TRANSP 0
VATRNORM
Visible characters
(visual attribute normal, control character sequence)
Type of Input
:
Single value, optional
Possible Values
:
Even number of hexadecimal digits or 0
(0 stands for no control character sequence)
Default values, depending on the device type
PT88 0
QUME-ONLY-SCREEN 1B4730
QUME-ONLY-PT88 0
QUME-SCRE-AND-PT88 1B4730
PC-D-ONLY-SCREEN 1B5B306D
PC-D-ONLY-PT88 0
PC-D-SCRE-AND-PT88 1B5B306D
ASCII-TRANSP 0
EBCDIC-TRANSP 0
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.