26.5 Error Messages and Advisories

26.5.1 Error Messages

 
F01:
CONFIGURATION NOT FOUND
F02:
MOUNTING SLOT <slot> NOT VALID IN <unit> SERVER
F03:
PART NUMBER <partno> NOT VALID IN <unit> SERVER
F04:
THE ENTERED ASSIGNMENT (PART NUMBER - MOUNTING SLOT) IS NOT
 
POSSIBLE FOR <unit> SERVER
F05:
NO CONFIGURATION FOUND TO DELETE
F06:
NO CONFIGURATION ASSIGNED
F07:
SPECIFIED MOUNTING SLOT <slot> NOT IN CONFIGURATION
F08:
CONFIGURATION WAS NOT ACTIVATED
F09:
CONFIGURATION WAS NOT DEACTIVATED
F10:
SPECIFIED MOUNTING SLOT <slot> ALREADY ASSIGNED
F11:
ERROR IN LSCR DIALOG (TIME OUT)
F12:
HARDWARE STILL ASSIGNED AT SLOT <slot>
F13:
BOARDS IN ADS MAY NOT BE DELETED
F14:
MOUNTING SLOT <slot> IS NOT ASSIGNED
F15:
NO LCU SPECIFIED
F16:
NO LBC SPECIFIED
F17:
SLOT <slot> SPECIFIED TWICE
F18:
NO PART NUMBER WAS SPECIFIED FOR SLOT <slot>
F19:
NO SLOT WAS SPECIFIED FOR PART NUMBER <partno>
F20:
LINES STILL ASSIGNED (DELETE THEM USING TCSM, ATCSM OR LCS0)
F21:
NO SUITABLE LOADWARE ASSIGNED
F22:
NOT POSSIBLE TO ASSIGN SINCE OTHER CONFIGURATION ALREADY ASSIGNED
F23:
THE LCX NUMBER DERIVED FROM SLOT <slot> IS NOT IN THE ADMISSIBLE RANGE
F24:
SERVICE <lw> IS NOT ALLOWED
F25:
SERVICE <lw> IS MARKED AS NOT AVAILABLE
F26:
SERVICE <lw> CANNOT BE ASSIGNED ON ACCOUNT OF THE KEY VALUE
F27:
SERVICE <lw> IS NOT ALLOWED IN <unit> SERVER AT THE
 
LCX NUMBER DERIVED FROM SLOT <slot> IN SERVER
F28:
SLOT <slot> IS NOT SPECIFIED OR NOT VALID
F29:
SERVICE <lw> IS NOT SPECIFIED OR NOT VALID
F30:
AT SLOT <slot> NO SERVICE <lw> ASSIGNED
F31:
NO EXTENSION SHELF POSSIBLE
F32:
NO LOADWARE FOUND
F33:
THE SPECIFIED LOADWARE DOES NOT EXIST
F34:
SHELF PART NUMBER/SHELF CONFIGURATION NOT ALLOWED
F35:
SHELF PART NUMBER/SHELF CONFIGURATION NOT VALID
F36:
SHELF PART NUMBER/SHELF CONFIGURATION NOT ALLOWED FOR <unit> SERVER
F37:
NOT POSSIBLE TO CREATE SINCE BOARDS ARE ALREADY CREATED
F38:
NO LOADWARE CREATED FOR THIS SLOT
F39:
TYPE=SWU IS ONLY FOR UNIT=A1 POSSIBLE
F40:
A LOADWARE IS ALREADY INSTALLED FOR LCXNO <lcxno>
F41:
THE SPECIFIED PARTNO IS NOT VALID FOR TYPE=SWU
F42:
HARDWARE STILL ASSIGNED ON LCXNO <lcxno>
F43:
LINES STILL ASSIGNED, DELETE THEM USING TCSM OR ATCSM
F44:
TYPE=DPP IS ONLY FOR UNIT=A1 POSSIBLE
F45:
PLEASE DEACTIVATE UNIX BEFORE CONFIGURING LINE 11 FOR RMX
F46:
LINE <8> IS RESERVED FOR THE CONSOLE
F47:
A RESERVATION OF A LINE FOR RMX IS NOT POSSIBLE IN A CPCI SHELF
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.