27.2.3
DELETE-BCSU
Before a peripheral module is removed, the line circuits must be canceled.
For certain modules the AMO creates a modulespecific memory in the database, where certain modulespecific data are administered. This means that data which for example can be added or changed by means of AMO-CGWB and so on, will be deleted without any warning.
An exception is only the WAML1 board, which can only be deleted if the corresponding data have explicitely been deleted before.
Procedure Overview
Command Code
Parameter
DELETE-BCSU
MTYPE=PER,[LTG=<number>],LTU=<number>,SLOT=<number>
,PARTNO=<string>,[FCTID=<number>];
|MTYPE=SIUP,[LTG=<number>],LTU=<number>
,SLOT=<number>;
|MTYPE=RG,[LTG=<number>],LTU=<number>,SLOT=<number>;
|MTYPE=ACGEN,[LTG=<number>],LTU=<number>
,SLOT=<number>;
|MTYPE=DIU,[LTG=<number>],LTU=<number>
,SLOT=<number>;
|MTYPE=TMD,[LTG=<number>],LTU=<number>,SLOT=<number>;
|MTYPE=IPGW,[LTG=<number>],LTU=<number>,SLOT=<number>;
Example
1.
Remove the RG module having the parameters LTG=1, LTU=1 and SLOT=19.
Input:
DELETE-BCSU:RG,1,1,19;
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.