28.4.5
DISPLAY-BDAT
This function is used to output the module data in tabular form according to the specific position. The module data can be displayed as follows:
–
for an addressed position
–
per LTU if a SLOT has not been entered
–
all positions if neither a SLOT nor an LTU has been entered
STMA module data
Only the Global Parameter Table can be displayed in the PSW operating modes.
In operating mode NW20 the global module data and the network related data are always displayed together.
WAML2 module data
Configured entries can be output individually for each table or jointly for all tables. By default all configured entries are output.
The WAML2 module has an Ethernet interface for which reason there is also a MAC address that can be output (TABTYPE=MACADDR).
If TABTYPE=ALL is specified, all tables including the MAC address are output.
If a table is empty message H16 is output.
Message H12 explicitly draws the user’s attention to the fact that WAML2 configuration data have been changed since the last loading job and that reloading of the WAML2 is required in order to make the changes effective.
Procedure overview
Command
Parameter
DISPLAY-BDAT
[LTG=<number>],[LTU=<number>],[SLOT=<number>]
,TYPE=STMA
,[OPMODE=GLOBAL];
(1)
,[OPMODE=NW20];
,TYPE=WAML2
(2)
,[TABTYPE=GLOBAL];
,[TABTYPE=NETWORK];
,[TABTYPE=IPROUTE];
,[TABTYPE=FIREMAC];
,[TABTYPE=MACADDR];
,[TABTYPE=ALL];
Examples
STMA module data
1.
Output of the global STMA module data at position 1-2-43.
Input:
DISP-BDAT:,2,43,STMA,GLOBAL;
Output:
+-----------------------------------------------------------------------+
| |
| STMA GLOBAL PARAMETERS |
| ====================== |
| |
+----------------------------------------------------------+------------+
| STMA: LTG = 1 LTU = 2 SLOT = 43 FCTID: 4 | SRCGRP: 1 |
+----------------------------------------------------------+------------+
| OPMODE = PSW L1MODE = SDH REASBUF = 16 ATMPROT = UNI31 |
| |
| VCIOFS0 = 20 VCI RANGE FOR VPI0: 10272 - 10751 |
| VCIOFS1 = 31 VCI RANGE FOR VPI1: 15904 - 16383 |
| VCIOFS2 = 0 VCI RANGE FOR VPI2: 32 - 511 |
| VCIOFS3 = 0 VCI RANGE FOR VPI3: 32 - 511 |
| VCIOFS4 = 0 VCI RANGE FOR VPI4: 32 - 511 |
| VCIOFS5 = 0 VCI RANGE FOR VPI5: 32 - 511 |
| VCIOFS6 = 0 VCI RANGE FOR VPI6: 32 - 511 |
| VCIOFS7 = 0 VCI RANGE FOR VPI7: 32 - 511 |
+-----------------------------------------------------------------------+
2.
Output of all STMA module data.
Input:
DISP-BDAT:,2,31,STMA,NW20;
Output:
+-----------------------------------------------------------------------+
| |
| STMA GLOBAL PARAMETERS |
| ====================== |
| |
+----------------------------------------------------------+------------+
| STMA: LTG = 1 LTU = 2 SLOT = 31 FCTID: 5 | SRCGRP: 1 |
+----------------------------------------------------------+------------+
| OPMODE : NW20 L1MODE = SDH REASBUF = 16 ATMPROT = UNITEST |
| |
| VCIOFS0 = 10 VCI RANGE FOR VPI0: 5152 - 5631 |
| VCIOFS1 = 0 VCI RANGE FOR VPI1: 32 - 511 |
| VCIOFS2 = 0 VCI RANGE FOR VPI2: 32 - 511 |
| VCIOFS3 = 0 VCI RANGE FOR VPI3: 32 - 511 |
| VCIOFS4 = 0 VCI RANGE FOR VPI4: 32 - 511 |
| VCIOFS5 = 0 VCI RANGE FOR VPI5: 32 - 511 |
| VCIOFS6 = 0 VCI RANGE FOR VPI6: 32 - 511 |
| VCIOFS7 = 0 VCI RANGE FOR VPI7: 32 - 511 |
+-----------------------------------------------------------------------+
| NETWORKING 2.0 RELATED DATA |
+-----------------------------------------------------------------------+
| ATMADDR : 0614604128 ATMNPI: ISDN |
| PATTERN : 213 (H'D5) SIGVPI: 0 |
| |
| VPCI0 = 0 VPCI1 = 1 VPCI2 = 2 VPCI3 = 3 |
| VPCI4 = 4 VPCI5 = 5 VPCI6 = 6 VPCI7 = 7 |
+-----------------------------------------------------------------------+
WAML2 module data
3.
Output of the Global Parameter Table of the WAML2 module.
Input:
DISP-BDAT:1,2,25,WAML2,GLOBAL;
Output:
+----------------------------------------------+-------------+
| WAML2: LTG = 1 LTU = 2 SLOT = 25 | SRCGRP: 1 |
+----------------------------------------------+-------------+
+------------------------------------------------------------+
| |
| GLOBAL PARAMETERS |
| ================= |
| |
| LAN HW-INTERFACE: AUI ACTIVE-FLAG: EXTLAN1 |
| TRACE-LEVEL: 3 FIREWALL: NONE |
| TC SERVER IP-ADDRESS: 128.001.002.064 |
| TC SERVER PORT NUMBER: 1000 WAML2 PORT NUMBER: 1010 |
+------------------------------------------------------------+
H12: CHANGED CONFIGURATION DATA AVAILABLE - LOAD WAML2 BOARD WITH COMMAND
'EXEC-BDAT' REQUIRED.
4.
Output of the created network interface in the Network Interface Table.
Input:
DISP-BDAT:1,2,25,WAML2,NETWORK;
Output:
+----------------------------------------------+-------------+
| WAML2: LTG = 1 LTU = 2 SLOT = 25 | SRCGRP: 1 |
+----------------------------------------------+-------------+
+------------------------------------------------------------+
| |
| NETWORK INTERFACE TABLE |
| ======================= |
| |
| INTERFACE NAME | IP-ADDRESS | IP-NETMASK | MTU |
+-----------------+-----------------+-----------------+------+
| EXTLAN1 | 192.168.017.004 | 255.255.255.000 | 1024 |
+-----------------+-----------------+-----------------+------+
H12: CHANGED CONFIGURATION DATA AVAILABLE - LOAD WAML2 BOARD WITH COMMAND
'EXEC-BDAT' REQUIRED.
5.
Output of all entries added in the IP Routing Table.
Input:
DISP-BDAT:1,2,25,WAML2,IPROUTE;
Output:
+----------------------------------------------+-------------+
| WAML2: LTG = 1 LTU = 2 SLOT = 25 | SRCGRP: 1 |
+----------------------------------------------+-------------+
+------------------------------------------------------------+
| |
| IP - ROUTING TABLE |
| ================== |
| |
| |DESTI-| | IP-ADDRESS OF |
| IP-ADDRESS |NATION| IP-NETMASK | NEXT ROUTER |
+-----------------+------+-----------------+-----------------+
| 198.001.108.000 | NET | 255.255.255.000 | 192.021.002.001 |
| 198.001.108.103 | HOST | --- | 192.021.022.011 |
+-----------------+------+-----------------+-----------------+
H12: CHANGED CONFIGURATION DATA AVAILABLE - LOAD WAML2 BOARD WITH COMMAND
'EXEC-BDAT' REQUIRED.
6.
Output of the entry from the Firewall MAC address table.
Input:
DISP-BDAT:1,2,25,WAML2,FIREMAC;
Output:
+----------------------------------------------+-------------+
| WAML2: LTG = 1 LTU = 2 SLOT = 25 | SRCGRP: 1 |
+----------------------------------------------+-------------+
+----------------------------------------------------------------------------+
| |
| FIREWALL MAC-ADDRESS TABLE |
| ========================== |
| |
| IP-ADDRESS | MAC-ADDRESS || IP-ADDRESS | MAC-ADDRESS |
+-----------------+-------------------++-----------------+-------------------+
| 140.001.000.010 | CC.00.A0.45.D0.7F || 000.000.000.000 | 00.00.00.00.00.00 |
| 000.000.000.000 | 00.00.00.00.00.00 || 000.000.000.000 | 00.00.00.00.00.00 |
+-----------------+-------------------++-----------------+-------------------+
H12: CHANGED CONFIGURATION DATA AVAILABLE - LOAD WAML2 BOARD WITH COMMAND
'EXEC-BDAT' REQUIRED.
7.
Displaying the WAML MAC address.
Input:
DISP-BDAT:1,2,25,WAML2,MACADDR;
Output:
+----------------------------------------------+-------------+
| WAML2: LTG = 1 LTU = 2 SLOT = 25 | SRCGRP: 1 |
+----------------------------------------------+-------------+
+------------------------------------------------------------+
| |
| WAML2 MAC - ADDRESS |
| =================== |
| |
| EXTERNAL LAN: 08.00.06.0A.0F.63 |
+------------------------------------------------------------+
8.
Output of all entries in the WAML2 configuration tables.
Input:
DISP-BDAT:,2,25,WAML2;
Output:
The table contents are output in the following order:
GLOBAL
-
Global Parameter Table
NETWORK
-
Network Interface Table
IPROUTE
-
IP Routing Table
FIREMAC
-
Firewall MAC Address Table
MACADDR
-
MAC Address of the WAML2 Module
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.