29.3.1
CHANGE-BERUM
Enter the code indicating which COS is active.
1.
For stations (TYPE=STN)
Activate a selected or alternative COS.
2.
for COSX groups (TYPE=COSX)
Activate a selected COS.
For stations associated with a DCI, the code (COS pointer) is also changed in the line tables of the DCI.
If the active state of at least one COSX group is changed, the AMO initiates updating of the instant display buffers of all attendant consoles.
Note
Switchover is not possible for stations with key-lock (COS KEYSTN).
Procedure Overview
Command Code
Parameter
CHANGE-BERUM
TYPE=STN,STNO=<number>,[COSACT=<param>];
|TYPE=COSX,COSX=<number>,COSACT=<param>;
Examples
1.
Switch COS2 to active for stations 2100, 2106, and 2121-2139.
Input:
CHANGE-BERUM:TYPE=STN,STNO=2100&2106&2121&&2139,COSACT=2;
Output:
F02 : 2123 IS NOT A STATION NUMBER
CHANGE PARTIALLY COMPLETED;
2.
Switch COS2 to active for COSX group 1-2
Input:
CHANGE-BERUM:BUM,1&2,2;
3.
Change the active state for station 2109 to the alternative COS
Input:
CHANGE-BERUM:STN,2109;
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.