50.4 Error Messages and Advisories

50.4.1 Error Messages

 
F01:
STATION NUMBER <xxxx> NOT PRESENT
F02
THE SYSTEM MEMORY HAS BEEN EXCEEDED
F03:
MAXIMUM NUMBER OF COM GROUPS REACHED, NUMBER HAS TO BE INCREASED BY MEANS OF ADD-DIMSU:COMGR=<xxx>;
F04:
STION NUMBER <stno> ALREDY A MEMBER OF COM GROUP <grno>
F05:
STATION NUMBER <stno> IS EITHER NOT A OPTISET NOR A OPTIP500 NOR A SET600
F06:
MEMBER NUMBER <stno> IS INVALID FOR A SMALL COM GROUP
F07:
NUMBER OF STATION NUMBERS AND NUMBER OF MEMBER NUMBERS DO NOT MATCH
F08:
COM GROUP <grno> DOES NOT EXIST
F11:
INCORRECT VALUES FOR DELETE WERE ENTERED
F12:
COM GROUP NUMBER TOO LARGE - REFER TO COMGR ALLOC IN AMO DIMEN
F13:
<xxxx> THE SPECIFIED CLASS OF SERVICE NUMBER IS LARGER THAN THE
F14:
GROUP SIZE CANNOT BE CHANGED FROM LARGE TO SMALL IN AN ADD OPERATION
F15:
STNO NUMBER <stno> IS NOT A MEMBER OF COM GROUP <grno>
F16:
THE RANGE <stn1> && <stn2> IS NOT IN THE COM GROUP <grno>
F17:
STATION NUMBER <stno> IS NOT A MEMBER OF ANY COM GROUP
F18:
THE RANGE <stn1> && <stn2> IS NOT IN ANY COM GROUP
F19:
THE LOWER AND UPPER LIMITS OF A STNO RANGE SHOULD HAVE SAME NUMBER OF DIGITS
F20:
CCIDXS OR CCIDXD HAS REACHED ITS CRITICAL LIMIT NUMBER HAS TO BE INCREASED BY MEANS OF ADD-DIMSU:CCIDXS=<xxx>; OR ADD-DIMSU:CCIDXD=<xxx>;
F21:
MAXIMUM NUMBER OF INFO FIELDS ARE USED, NUMBER HAS TO BE INCREASED BY MEANS OF ADD-DIMSU:INFO=<xxx>;
F22:
INDEX IS OUT OF RANGE
F23:
ENTERED STNO RANGE IS TOO LARGE .
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.