51.5 Error Messages and Advisories

51.5.1 Error Messages


F01:	CABINET NOT PRESENT
F02:	CABINET ALREADY PRESENT
F03:	NEW CABINET ALREADY PRESENT
F04:	WRONG CABINET ADDRESS
F05:	CABINET TYPE NOT PRESENT
F06:	CABINET TYPE NOT ALLOWED IN SYSTEM
F07:	NO CABINET ENTERED
F08:	SHELF ALREADY EXISTS
F09:	SHELF DOES NOT EXIST
F10:	SHELF LOCKED
F11:	FRAME CANNOT BE CONFIGURED AT SPECIFIED SHELF
F12:	FRAME WITH SPECIFIED LTUNO ALREADY ENTERED FOR SPECIFIED CABINET
F13:	FRAME WITH SPECIFIED LTUNO ALREADY EXISTS
F14:	NEW FRAME ALREADY EXISTS
F15:	MAXIMUM OF @@@ CABINETS MAY BE ENTERED
F16:	FRAME TYPE NOT PRESENT
F17:	LTU NUMBER REQUIRED FOR SPECIFIED FRAME TYPE
F18:	LTU NUMBER NOT ALLOWED IN SYSTEM
F19:	FRAME TYPE NOT ALLOWED IN SYSTEM
F20:	PID REQUIRED FOR SPECIFIED FRAME TYPE
F21:	PID @@@@@ NOT ALLOWED IN SYSTEM
F22:	ONLY ONE PID ALLOWED FOR SPECIFIED FRAME
F23:	PID FOR @@@@@@ OR @@@@@@ MISSING
F24:	ONLY PIDS OF ASSOCIATED SYSTEM HALVES ARE ALLOWED
F25:	PID @@@@@ NOT ALLOWED FOR SPECIFIED FRAME TYPE
F26:	ONLY PIDS OF THE SAME SYSTEMHALF CAN BE ENTERED
F27:	COMBINATION OF CLASS AND ASSEMBLY IS NOT ALLOWED
F28:	FOR SYSTEMS RUNNING IN SIMPLEX MODE ONLY THE PID OF AN A HALF IS ALLOWED
F29:	COMBINATION OF PIDS NOT VALID FOR SPECIFIED FRAME
F30:	ONLY TWO PIDS ALLOWED FOR SPECIFIED FRAME
F31:	CABINET TYPE FILE "@@@@@@@@@@@@@@@@@@@@@@" NOT EXISTING
F32:	FRAME TYPE FILE "@@@@@@@@@@@@@@@@@@@@@@" NOT EXISTING
F33:	ERROR DURING "LOAD OVERLAY" ERRORCODE: H’@@@@ FILE: @@@@@@@@@@@@@@@@@@@@@@
F34:	FOR THE GIVEN FRAME "@@@@@@@@" THE VALID LTU RANGE IS FROM @@ TO @@.

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.