66 DCIC - Configuration of DCI


Interrelationships	Parameter Description
Functions of the AMO	Error Messages and Advisories

AMO DCIC makes it possible to create the static database for DCIs (data communication interface) and to display, change, delete, and regenerate the same. The DCI can be assigned on a standard SLMB or a SLMB_16 module.

The DCI is assigned any terminal that is created by means of AMO SCSU (AUXDIGI) as an associated station. The associated station can also be a station without hardware (virtual station, AMO SCSU, INS=FLOAT).

The ADD function also allows activation of the DCIs immediatly. Already assigned DCIs can be activated or deactivated only by means of the switch AMO DSSU.

The AMO wil add the Parameters for the DCI when needed.

These data are for basic parameter set:

0A,0A,00,00,00,04,21,11,0D,02,0F,04,1F,31,01,
02,28,07,0F,7F,11,03,11,3D,38,01,27,08,01,0A,
17,01,00,00,00,00,00,00,00,00

and for the supplementary set:

03,14,50,03,08,04,08,50,03,08,04,08,50,03,08,
04,08,50,00,00,00,00,00,00,00,00,00,00,00,00,
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.