66.4 Error Messages and Advisories

66.4.1 Error Messages

 
F01:
PEN<x> ERROR; PERMISSIBLE RANGE FOR LTG: 1 - <ltg_max>
F02:
PEN<x> ERROR; PERMISSIBLE RANGE FOR LTU: 1 - <ltu_max>
F03:
PEN<x> ERROR; SLOT FORMALLY INCORRECT
F04:
PEN<x> ERROR; PERMISSIBLE RANGE FOR CIRCUIT NUMBER: 0 - <cct_max>
F05:
NO MORE PEN’S FREE AT SLMB
F06:
PEN<x> ERROR; LTG NOT ASSIGNED
F07:
PEN<x> ERROR; LTU NOT ASSIGNED
F08:
THE DCI MUST BE DEACTIVATED (AMO DSSU)
F09:
THE DCI IS CAMP-ON BLOCKED. REPEAT COMMAND LATER OR
DEACTIVATE IMMEDIATELY (AMO DSSU)
F10:
PEN SPECIFIED ALREADY OCCUPIED
F11:
NO DCI ASSIGNED AT PEN SPECIFIED
F12:
DCI AT PEN SPECIFIED STILL ASSIGNED TO A HUNTING GROUP
F13:
NO MATCHING MODULE (SLMB) CONFIGURED FOR THE SPECIFIED PEN
F16:
INSUFFICIENT DEVICE MEMORY SPACE (AMO DIMSU: PARAMETER LODEN)
F17:
IF PEN2 IS SPECIFIED, PEN1 MUST ALSO BE SPECIFIED
F18:
PEN1 MUST BE SMALLER THAN PEN2
F19:
STNO TO BE ASSOCIATED NOT ASSIGNED
F20:
STNO TO BE ASSOCIATED ALREADY ASSIGNED TO A DATA TERMINAL EQUIPMENT
F21:
STNO TO BE ASSOCIATED HAS AN INADMISSIBLE DEVICE TYPE
F22:
PEN<x> NOT SPECIFIED AT THE PHYSICAL MODULE LOCATION
F25:
SPECIFIED PEN CURENTLY SIGNED OFF.
USE AMO BCSU TO SIGN ON OR ENTER OTHER PEN
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.