67.3.3
CHANGE-DCSM
This action is used to change the part number or the information of an external device in an existing area configuration.
The following restrictions must be observed:
1.
The device granularity must not be changed
2.
The device size must be greater than that of the device to be change
3.
The device types (HD, EXT, FM) must not be changed
Procedure Overview
Command Code
Parameter
CHANGE-DCSM
[UNIT=<param>],CNO=<number>
|,DEVTYPE=HD,PNO=<text>;
|,DEVTYPE=FM,PNO=<text>;
|,DEVTYPE=EXT,INFO=<text>;
Example
1.
Controller 2 is assigned a Hard disk with the part number HD001 in place of an already existing Hard disk.
Input:
ADD-DCSM:,2,HD,2GIGA;
CHANGE-DCSM:A1,2,HD,HD001;
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.