71.2.1 ADD-DEFPP

When creating an entry with the appropriate call processing oriented data is entered in each case into the paying party assignment table.

Procedure Overview


Command Code	Parameter
ADD-DEFPP	CONNTYPE=<param>,[SUPLSERV=<param>],[SUBSID=<param>] ,[TRANSTYP=<param>],[LTU=<number>],[SLOT=<number>] ,[CCT=<number>],[BCHAN=<number>],CHRGEE1=<param> ,[CHRGEE2=<param>],[CHRGEE3=<param>],[CHRGEE4=<param>] ,[CHRGEE5=<param>],[CHRGEE6=<param>];

Examples:

Creating of outgoing connections.

Two outgoing connections (CONNTYPE=OUTG) with the following parameters are created:

User defined entry outgoing 1:

A station is called, with a call forwarding (FWD) to external (supplementary service: call forwarding).

The costs of the call has to pay the first rerouted subscriber (paying party selection 1: first rerouted subscriber).

SUPLSERV=CALLFOR,
CHRGEE1=FIRSTRED;

Without this entry the default values (special system definitions or system default) are used. The entered values you can find in Section , “Definitions for outgoing connections”.

User defined entry outgoing 2:

An external call will pass through by several systems and transferred from attendant to external (supplementary service: call transfer, subscriber identification: attendant (AC), call transfer situation: both partners are in the public network).

The costs of the call has to pay the chargee who is determined in a other system of the network and transferred (paying party selection 1: chargee was determinated before in the network and transferred) or

the caller (paying party selection 2: calling station (caller)) or

if this does not admit the incoming trunk (AMO-TLZO) (paying party selection 3: number of calling (incoming) trunk determinated with the help of AMO-TLZO).

SUPLSERV=TRANSFER,
SUBSID=ATTEND,
TRANSTYP=BOPPUB,
CHRGEE1=BILLING,
CHRGEE2=CALLING,
CHRGEE3=TRUNK;

Without this entry the default values (special system definitions or system default) are used. The entered values you can find in Section , “Definitions for outgoing connections”.

Input:

ADD-DEFPP:CONNTYPE=OUTG,SUPLSERV=CALLFOR,CHRGEE1=FIRSTRED;
ADD-DEFPP:CONNTYPE=OUTG,SUPLSERV=TRANSFER,SUBSID=ATTEND,TRANSTYP=BOPPUB
,CHRGEE1=BILLING,CHRGEE2=CALLING,CHRGEE3=TRUNK;

Creating of incoming connections.

Two incoming connections (CONNTYPE=INCO) with the following parameters are created:

User defined entry incoming 1:

The attendant console (AC) is called by external station (supplementary service: call transfer, subscriber identification: attendant, call transfer situation: both partners are in the public network).

The costs of the call has to pay the external station, which is attend from the attendant console (AC) (paying party selection 1: station, with that a connection came) or

if no call number was given from OFFICE, the incoming trunk (paying party selection 2: number of calling (incoming) trunk determinated with the help of AMO-TLZO).

SUPLSERV=TRANSFER,
SUBSID=ATTEND,
TRANSTYP=BOPPUB,
CHRGEE1=CONNECT,
CHRGEE2=TRUNK;

Without this entry the default values (special system definitions or system default) are used. The entered values you can find in Section , “Definitions for incoming connections”.

User defined entry incoming 2:

An incoming call from trunk 1-91-3-1 (line trunk unit (LTU): 1, specification of the mounting pitch in the LTU (SLOT): 91, circuit number: 3, number of ISDN B-channel: 1)

is to be paid by the incoming trunk (AMO-TLZO) (paying party selection 1: number of calling (incoming/outgoing) trunk determinated with the help of AMO-TLZO).

LTU=1,
SLOT=91,
CCT=3,
BCHAN=1,
CHRGEE1=TRUNK;

Without this entry the default values (special system definitions or system default) are used. The entered values you can find in Section , “Definitions for incoming connections”.

Input:

ADD-DEFPP:CONNTYPE=INCO,SUPLSERV=TRANSFER,SUBSID=ATTEND,TRANSTYP=BOPPUB
,CHRGEE1=CONNECT,CHRGEE2=TRUNK;
ADD-DEFPP:CONNTYPE=INCO,LTU=1,SLOT=91,CCT=3,BCHAN=1,CHRGEE1=TRUNK;

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.