72.3 Parameter Description

 
ACACTON
Events of attendant console (AC) will be monitored:
AC activates/deactivates nightservice,
AC pulls/reconnect the jack,
AC is out of/in service.
 
Type of Input
:
Single value, optional, 4. parameter of a min-1-group (CHANGE)
 
Possible Values
:
Y
= Yes
 
 
 
N
= No
 
Default Value
:
N
 
 
 
 
 
 
ALLON
All objects will be monitored, except processor load and attendant console activity.
If this switch is on, all settings in the list of measurement objects of AMO_DEFTM have no effect.
Is this switch not set, then the measurement of measurement objects of the list of measurement objects takes place.
 
Type of Input
:
Single value, optional, 2. parameter of a min-1-group (CHANGE)
 
Possible Values
:
Y
= Yes
 
 
 
N
= No
 
Default Value
:
N
 
 
 
 
 
 
ATNDGRNO
Attendant group number (AMO-VFGR)
 
Type of Input
:
Single value, required (ADD)
 
 
 
single value, optional (DELETE)
 
 
 
range, optional
 
 
Possible Values
:
0 to 15
 
 
 
 
 
 
CCT
Circuit number
 
Type of Input
:
Single value, optional
 
 
 
range, optional
 
 
Possible Values
:
0 to 255
 
 
 
 
 
 
LOADON
A special CDR record is generated every 10 seconds, containing processor load (SWU and ADP)
 
Type of Input
:
Single value, optional, 3. parameter of a min-1-group (CHANGE)
 
Possible Values
:
Y
= Yes
 
 
 
N
= No
 
Default Value
:
N
 
 
 
 
 
 
LTU
Line Trunk Unit
 
Type of Input
:
Single value, required (ADD)
 
 
 
single value, optional (DELETE)
 
 
 
range, optional
 
 
Possible Values
:
1 to 99
 
 
Note
:
LTU 16 is used Hicom internal.
 
 
 
 
 
NUMBER
Station number
 
Type of Input
:
Single value, required (ADD)
 
 
 
single value, optional (DELETE)
 
 
 
range, optional
 
 
Possible Values
:
max. 22 digits, digits 0 to 9
 
 
 
 
 
 
 
 
 
 
OBJECT
Add, delete and display of measurement object types
 
Type of Input
:
Single value, required (ADD, DELETE)
 
 
 
single value, optional (DISPLAY)
 
 
 
range, optional
 
 
Possible Values
:
ALL
= All objects (DELETE and DISPLAY only)
 
 
 
ATTND
= Attendant number
 
 
 
ATTNDGRP
= Attendant group number
 
 
 
HUNTHEAD
= Pilot number of a hunt group
 
 
 
TRUNK
= Trunk number
 
 
 
TRUNKGRP
= Trunk group number
 
 
 
SUBSCR
= Subscriber number
 
Default Value
:
ALL
= All objects (DISPLAY only)
 
 
 
 
 
PMON
Central switch for performance management (PM), needed to start/stop PM.
If this switch is off, all other settings of AMO-DEFTM have no effect.
 
Type of Input
:
Single value, optional, 1. parameter of a min-1-group (CHANGE)
 
Possible Values
:
Y
= Yes
 
 
 
N
= No
 
Default Value
:
N
 
 
 
 
 
 
SLOT
Specification of the mounting pitch in the LTU
 
Type of Input
:
Single value, optional
 
 
 
range, optional
 
 
Possible Values
:
1 to 121
 
 
 
 
 
 
TRKGRNO
Trunk group number (AMO-BUEND)
 
Type of Input
:
Single value, required (ADD)
 
 
 
single value, optional (DELETE)
 
 
 
range, optional
 
 
Possible Values
:
1 to 512
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.