76.4 Error Messages and Advisories

76.4.1 Error Messages

 
F01:
PARAMETER <ppppppp> MUST BE GREATER THAN OR EQUAL TO THE MAX. USED VALUE (For parameters CCIDXS, CCIDXD and GPIDX, the max. used value must be greater by a factor of 3 than the value output for DISPLAY).
F02:
ENTER PARAMETERS <ppppppp> and <ppppppp>.
F03:
PARAMETER <ppppppp> MUST BE GREATER THAN OR EQUAL TO THE MAX. USED VALUE AND LESS THAN OR EQUAL TO THE ACTUAL VALUE OF <ppppppp>.
F04:
PARAMETER <ppppppp> MUST BE GREATER THAN OR EQUAL TO THE MAX. USED VALUE AND GREATER THAN OR EQUAL TO THE ACTUAL VALUE OF <ppppppp>.
F05:
<ppppppp> IS TOO LOW.
F06:
PARAMETER <ppppppp> CAN ONLY BE INCREASED.
F07:
VALUE FOR PARAMETER <ppppppp> IS GREATER THAN MAXIMUM PERMISSIBLE VALUE.
F08:
THE RESULT OF VALUES FOR PARAMETER <pppppp + pppppp> MUST BE < THAN <dddddd>.
F09:
INSUFFICIENT MEMORY ALLOCATED FOR <ppppppp>.
F10:
MEMORY REQUIRED FOR PARAMETER <ppppp>.
F20:
THE VALUE FOR PARAMETER <pppppp> MUST BE >= 256.
F21:
PARAMETER <HTCQB> MUST BE >= <dddddd> WHICH IS THE SUM OF ALL CURRENTLY CONFIGURED CQMAX PARAMETERS (AMO SA).
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.