99.3.2
CHANGE-FTCSM
Depending on which branch parameter TTYPE is given, the following takes place :
1.
the network book data is changed,
2.
the task book data is changed,
3.
the file transfer is either activated (START), terminated (STOP) or executed (RUN).
Procedure Overview
Command Code
Parameter
CHANGE-FTCSM
[UNIT=<param>]
,TTYPE=NCF,NCFNO=<number>
,[OSPTNR=<string>],[HPID=<string>]
,[DPAPPL=<string>],[FEPROC=<string>],
,[DPTYPE=<param>];
|,TTYPE=FTTF,[RSTIME=<number>]
,[FILNAM=<string>],[TASKMAX=<number>]
,[TASKIN=<number>],[TASKOUT=<number>];
|,TTYPE=STATE,STATE=<param>;
Examples
1.
Change the time interval of the restart
Input:
CHANGE-FTCSM:A1,FTTF,1;
2.
Change data having the network book number 16
Input:
CHANGE-FTCSM:A1,NCF,16,"EMSAPPL1","DVAPROZ2";
3.
Activate the file transfer
Input:
CHANGE-FTCSM:A1,STATE,START;
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.