99.4 Parameter Description

 
DPAPPL
Data processing application
 
Type of Input
:
Single value, mandatory (ADD)
 
 
 
optional (CHANGE)
 
Possible Values
:
Application name (1 - 8 chars, 1st char /= ’ ’)
 
 
 
 
 
DPTYPE
DATA Processing
 
Type of Input
:
Single value, optional
 
Possible Values
:
BS2000
 
 
 
 
OTHER
 
 
Default Value
:
BS2000
 
 
 
 
 
 
FEPROC
BCAM name of the front-end processor
 
Type of Input
:
Single value, mandatory (ADD)
 
 
 
optional (CHANGE)
 
Possible Values
:
Front-end processor name (1 - 8 chars, 1st char /= ’ ’)
 
 
 
 
 
FILNAM
File name of the file transfer task list
 
Type of Input
:
Single value, optional
 
Possible Values
:
Hard disk file name (max 32 chars)
 
Default Value
:
:DBD:FTyy (yy=UNIT)
 
 
 
 
 
HPID
Host processor identity
 
Type of Input
:
Single value, mandatory (ADD)
 
 
 
optional (CHANGE)
 
Possible Values
:
Processor name (1 - 8 chars, 1st char /= ’ ’)
 
 
 
 
 
NCFNO
Network configuration file entry number
 
Type of Input
:
Single value, mandatory (ADD, CHANGE)
 
 
 
optional (DELETE, DISPLAY)
 
Possible Values
:
1 - 255
 
 
 
 
 
 
OSPTNR
PBX application (OS partner)
 
Type of Input
:
Single value, mandatory (ADD)
 
 
 
optional (CHANGE)
 
Possible Values
:
Application name (1 - 8 chars, 1st char /= ’ ’)
 
 
 
 
 
RSTIME
Restart time
 
 
 
 
Type of Input
:
Single value, optional
 
Possible Values
:
1 - 10 minutes
 
 
Default Value
:
10 min
 
 
 
 
 
 
STATE
State of file transfer
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
START
 
 
 
 
STOP
 
 
 
 
RUN
 
 
 
 
 
 
TASKIN
Maximum number of tasks from remote system
 
Type of Input
:
Single value, optional
 
Possible Values
:
1 - 4
 
 
Default Value
:
1
 
 
 
 
 
 
TASKMAX
Maximum number of tasks
 
Type of Input
:
Single value, optional
 
Possible Values
:
1 - 4
 
 
Default Value
:
1
 
 
 
 
 
 
TASKOUT
Maximum number of tasks for remote system
 
Type of Input
:
Single value, optional
 
Possible Values
:
1 - 4
 
 
Default Value
:
1
 
 
 
 
 
 
TTYPE
Type of task
 
Type of Input
:
Single value,
 
 
 
 
mandatory (ADD, CHANGE, DELETE)
 
 
 
optional (DISPLAY)
 
Possible Values
:
NCF
= configure the network book
 
 
 
FTTF
= configure the task book
 
 
 
STATE
= set FT state
 
 
 
 
 
UNIT
Device name of the destination server
 
Type of Input
:
Single value, optional
 
Possible Values
:
A1
= Administration and Data Server (ADS)
 
Default Value
 
A1
 
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.