112.2.1 ADD-GRZW

Adding a call charge limit value or a call duration limit value or a call amount limit value for a routing code or a carrier or adding a hour limit for all entries. There is a maximum of 5 entrys for 5 different routing codes. The 6th entry is for all other routing codes. If there is no value for the parameter routing code, then the following limit values are for all other routing codes.
If no value for parameter "hour limit", "call charge unit limit" or "call amount unit limit" is specified, the limit value is set to its default value.

Procedure Overview


Command Code	Parameters
ADD-GRZW	TBL=RCD,[CDRCODE=<number>],[CDRULT=<number>],
	[CALLT=<number>],[AMOUNTLT=<number>];
	\|TBL=CAR,CARRIER=<number>,[CDRULT=<number>],
	CCALLT=<number>],[AMOUNTLT=<number>];
	\|TBL=HOUR,[HOURLIM=<number>];

Example

Create the call charge limit with 500 charge units, call duration limit value with 10 hours, 30 minutes and 15 seconds, call amount limit with 1000 amont units and the hour limit value with 10 hours for the routing code 1 .

Input:

ADD-GRZW:RCD,1,500,103015,1000;
ADD-GRZW:HOUR,10;

Create the call charge limit with 100 charge units, call duration limit value with 10 hours, 30
minutes and 15 seconds, call amount limit with 100 amont units and the hour limit value
with 10 hours for the carrier 1 .

Input:

ADD-GRZW:CAR,1,100,103015,100;
ADD-GRZW:HOUR,10;

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.