113.3
Parameter Description
ACTION
Used in the commands: DEF, LST;
To input the action procedures.
Type of Input
:
String, mandatory in DEF
optional in LST
Possible Values
:
Character string up to 1019 characters in length
Admissible actions : DUMP_BCA(<len>), DUMP_STACK(<len>),
DUMP_MEM_PHYS(<phys.addr>/<len>), DUMP_DPR(<value for DPR>/<len>),
DUMP_MEM_LOG(<offset>:<base>/<len>), DUMP_RNGT, DUMP_001,
DUMP_MEM_LOG(<selector>:<offset>/<len>)
DUMP_002, DUMP_003, DUMP_004, DEBUG_001, DEBUG_002, DEBUG_003
DEBUG_004, DEBUG_005, DEBUG_006, DEBUG_007, DEBUG_008
CNT
Used in the commands: ON, LST;
Specifies how many times a HIDUMP control string is executed.
Type of Input
:
Single value, mandatory in ON
optional in LST
Possible Values
:
0 - 255
COND
Used in the commands: DEF;
To input the conditions.
Type of Input
:
String, mandatory in DEF
Possible Values
:
Character string up to 1019 characters in length
CMD
Branch parameter,
Specifies the AMO-HIDMP command.
Type of Input
:
Single value, mandatory
Possible Values
:
DEF, DEL, END, LST, OFF, ON, P
(The meaning of these values is explained in the Function Overview.)
MDL
Used in the commands: P, EXEC-HIDMP;
Specifies the HW module for which the HIDUMP control segment is processed.
Type of Input
:
Single value, mandatory
Possible Values
:
CC, LTG
NUMBER
Used in the commands: DEF, DEL, LST, OFF, ON
Specifies the number (ID) of the control string.
Type of Input
:
Single value, mandatory
Possible Values
:
0 - 255
TYPE
Used in the commands: DEL, LST, OFF, ON
Branch parameter; specifies which control strings are to be processed.
Type of Input
:
Single value, mandatory
Possible Values
:
ALL, NO
in DEL
ACT, ALL, DEACT, NO
in LST
ALL, NO
in OFF
ALL, NO
in ON
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.