123.3.5
REGENERATE-KNFOR
If you enter this command without parameters, all destination node numbers are regenerated, sorted by numbering plan type.
However, you can limit output to the destination node numbers of a specific numbering plan or to a specific destination node number.
Procedure overview
Command Code
Parameter
REGENERATE-KNFOR
[DNNO=<number>],[NPI=<param>];
Example
1.
Regenerate all the destination node numbers entered in the format table.
Input:
REGENERATE-KNFOR;
Output:
ADD-KNFOR:3-1-6,ISDN,INTERNAT,,TRANSP,SEND1,SEND1,YES,IGNOR;
ADD-KNFOR:3-1-7,ISDN,,INTERPRE,NETWPROV,SEND0,SEND0,YES,IGNOR;
ADD-KNFOR:3-1-8,ISDN,NATIONAL,NATIONAL,TRANSP,SEND1,SEND1,NO,IGNOR;
ADD-KNFOR:3-1-9,ISDN,NATIOPRE,,USERNSCR,SEND2,SEND0,YES,IGNOR;
ADD-KNFOR:3-1-10,ISDN,,SUBSCR,USERVF,SEND0,SEND1,NO,IGNOR;
ADD-KNFOR:3-1-11,ISDN,UNKNOWN,UNKNOWN,USERVP,SEND1,SEND0,YES,IGNOR;
ADD-KNFOR:1,PRIVATE,LEVEL1,,NETWPROV,SEND0,SEND1,NO,IGNOR;
ADD-KNFOR:2-1,PRIVATE,,LEVEL2,NOTDEF,SEND1,SEND0,YES,IGNOR;
ADD-KNFOR:18-18-18,PRIVATE,LOCAL,,USERNSCR,SEND2,SEND0,YES,IGNOR;
ADD-KNFOR:22-0-0,PRIVATE,UNKNOWN,UNKNOWN,USERVF,SEND1,SEND1,NO,IGNOR;
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.