124.2.4
DISPLAY-KNLCR
This function makes it possible to output the classes-of-service which are used to modify the Least Cost Routing Access Rights.
Following posibilities exists:
a)
SNNO and DNNO are entered: display of the classes-of-service of the defined connection*)
b)
SNNO is entered: display of all connections related on the defined source node and the classes-of-service of these connections
c)
DNNO is entered: display of all connections related on the defined destination node and the classes-of-service of these connections
d)
SNNO and DNNO not entered: display of the classes-of-service of all connections
*) If the same LCR class-of-service powersets are used for the modification of the classmark subset of all subdomaines or nodes (addressed by a partial qualified node) and the entered connection is not selectively excluded, the entry of the partial qualified node is issued.
Procedure Overview
Command Code
Parameter
DISPLAY-KNLCR
[SNNO=<number>],[DNNO=<number>];
Example
The data for the connection SNNO=1-1-5 and DNNO=1-2-3 is to be displayed. For this connection, no explicit entry exists. However an entry exists, that is used for the modification for all nodes in the subdomain (1-1-0) and is displayed.
Input:
DISPLAY-KNLCR:SNNO=1-1-5,DNNO=1-2-3;
Output:
| SOURCE | DESTINATION| ADDSLCOS | REDSLCOS |
+------------+------------+----------------+----------------+
| 1-1-0 | 1-2-3 | 15 17 23 35 40 | 10 |
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.