124.4 Error Messages and Advisories

124.4.1 Error Messages


F01:	LEVEL <x> OF <xxxx> MAY NOT EXCEED <xxx>
F02:	THE NUMBER OF LEVELS FOR SNNO IS DIFFERENT TO THE NUMBER OF LEVELS FOR DNNO
F03:	ENTRY FOR THIS CONNECTION ALREADY EXISTS
F04:	NO ENTRY AVAILABLE FOR THIS CONNECTION
F05:	IT IS NOT POSSIBLE TO ADD ANY DATA BECAUSE THERE IS NO OWN NODE NUMBER CONFIGURED. CONFIGURE THE OWN NODE NUMBER WITH THE FOLLOWING COMMAND: CHANGE-ZAND:TYPE=ALLDATA,PNNO=<?>;
F06:	OWN NODE NUMBER NOT ALLOWED FOR <xxxx>
F07:	SNNO IS IDENTICAL WITH DNNO
F08:	ENTRY NOT POSSIBLE BECAUSE MAX. NUMBER OF ENTRIES IS ALREADY REACHED
F09:	<xxxx> LEVEL1 = <x> NOT ALLOWED. RANGE 1 TO <xxx>.
F10:	<xxxx> LEVEL0 = <x> NOT ALLOWED. RANGE 1 TO <xxx>.

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.