125.2.2.3
Standard configuration
•
For NPI=ISDN, PRIVATE Format Depending Modification is to be configured, using the AMO’s KNFOR, KNPRE, TDCSU and KNDEF.
•
The logical node OWN is replaced by all own virtual node numbers as configured by AMO KNDEF, TYPE=OWN.
•
For NPI=UNKNOWN in most cases a standard configuration is sufficient using KNMAT logical nodes. For example, in a 1 level open numbered network, a node with node/region code 911 (corresponds to station numbers 911xxxxx, where xxxxx means a local station number) should be configured with:
Input:
CHANGE-KNMAT:UNKNOWN,0,,OWN,,ROW,,OUT,911; /* level 0 node code = 911 */
CHANGE-KNMAT:UNKNOWN,0,,ROW,,OWN,,IN&TRANSI,,911;
Output, if for example only 1 own virtual node (=15) is configured in KNDEF-Table (message 1 for command 1 and message 2 for command 2)
H08: ONNOL=OWN WAS CONVERTED ACCORDING TO KNDEF-TABLE INTO ONNO=15.
H08: DNNOL=OWN WAS CONVERTED ACCORDING TO KNDEF-TABLE INTO DNNO=15.
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.