125.4.2
DISPLAY-KNMAT
Displays the denied connections and the station number modifications.
Only entries, which are different from the initialization values, are displayed.
The parameter TYPE controls whether only entries with denied connections, only entries with station number modifications, or both types of entry are displayed. If (in accordance with the TYPE selection parameter) an entry in the node connection matrix is displayed, then
all information is displayed (e.g. including the denied/allowed connection information, even if the selection was based on TYPE=MOD).
Although restricted connections are independent of the numbering plan, they are always displayed for all numbering plans to provide the user with as much information as possible (i.e. to ensure that all modifications are also displayed).
The system issues a prompt for the LEVEL parameter if it has not been specified in a command which contains physical node entries (ONNO, DNNO). Logical nodes (ONNOL, DNNOL) apply for all levels, which means that, if the LEVEL parameter is omitted, the modifications on all levels are displayed for the corresponding ONNOL/DNNOL.
Group relationship between ONNO and ONNOL and/or DNNO and DNNOL:
If one of the parameters in the group is specified, the parameter that has not been specified will be interpreted by default as "no display". If neither of the parameters in the group is specified, both parameters will be interpreted by default as "all nodes".
Procedure overview
Command code
Parameters
DISPLAY-KNMAT
[NPI=<param>],[LEVEL=<number>]
,{ONNO=<number>,ONNOL=<param>}
,{DNNO=<number>,DNNOL=<param>}
,[MODE=<param>]
Examples
1.
Display the station number modifications in the UNKNOWN numbering plan for connections from the originating nodes OWN, 91 and 96 to the destination nodes 80 to 85, and to all logical nodes on level 0. The KNDEF-Table contains only 1 own virtual node (95). For ONNO 96, no modification is entered for any DNNO; the message H02 is therefore output.
Input:
DISPLAY-KNMAT:UNKNOWN,0,91&96,OWN,80&&85,OWN&ROW&CDR,MOD;
Output:
H08: ONNOL=OWN WAS CONVERTED ACCORDING TO KNDEF-TABLE INTO ONNO=95.
---------------------------------------------------------------------------
NODE MATRIX FOR NPI = UNKNOWN, LEVEL = 0
---------------------------------------------------------------------------
ONNO /|DNNO /|CONN|MODCON| NUMEXT | NUMRED
ONNOL |DNNOL | | | |
------+------+----+------+------------------------+------------------------
91 | 80 | A |ALL | 91 | -
91 | 84 | D |IN | - | 40
| | |TRANSH| |
91 | 85 | A |NOMOD | 91 | 40
------+------+----+------+------------------------+------------------------
95 | 81 | A |ALL | - | 50
95 | 85 | A |ALL | 95 | 50
95 | CDR | A |ALL | 95 | 50
H02: NOT ALL REQUESTED ONNO ARE DISPLAYED
2.
Display denied connections between the originating regions 10 to 20 and all destination regions on level 1 in the network. In addition, the modifications for all NPIs are displayed, but only if CONN=D.
Input:
DISPLAY-KNMAT:,1,10&&20,,,,DEN;
Output:
---------------------------------------------------------------------------
NODE MATRIX FOR NPI = ISDN, LEVEL = 1
---------------------------------------------------------------------------
ONNO /|DNNO /|CONN|MODCON| NUMEXT | NUMRED
ONNOL |DNNOL | | | |
------+------+----+------+------------------------+------------------------
10 | 11 | D |ALL | 89 | -
------+------+----+------+------------------------+------------------------
15 | 10 | D |IN | - | 0089
15 | 99 | D |ALL | 711 | -
---------------------------------------------------------------------------
NODE MATRIX FOR NPI = PRIVATE, LEVEL = 1
---------------------------------------------------------------------------
ONNO /|DNNO /|CONN|MODCON| NUMEXT | NUMRED
ONNOL |DNNOL | | | |
------+------+----+------+------------------------+------------------------
10 | 11 | D |- | - | -
------+------+----+------+------------------------+------------------------
15 | 10 | D |IN | 21 | -
15 | 99 | D |ALL | - | 1121
---------------------------------------------------------------------------
NODE MATRIX FOR NPI = UNKNOWN, LEVEL = 1
---------------------------------------------------------------------------
ONNO /|DNNO /|CONN|MODCON| NUMEXT | NUMRED
ONNOL |DNNOL | | | |
------+------+----+------+------------------------+------------------------
10 | 11 | D |- | - | -
------+------+----+------+------------------------+------------------------
15 | 10 | D |- | - | -
15 | 99 | D |- | - | -
H02: NOT ALL REQUESTED ONNO ARE DISPLAYED
Note:
The parameter "MODE" does not affect the format of the display.
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.