125.5 Parameter description


CONN	Connection from ONNO to DNNO allowed or denied
	Type of input	:	Single value, group member (at least 1) with MODCON, NUMEXT, NUMRED for CHANGE
	Possible values	:	A	= allowed (basic initialization)
			D	= denied
	Default value		Entry remains unchanged
	Initialization value		A

DNNO	Destination virtual node number
	Node numbers have level specific ranges.
	Type of input	:	single value, range or concatenated values, group member (at least 1) with DNNOL for CHANGE, group member (maximum 2) with DNNOL for DISPLAY, REGENERATE
	Possible values	:	1 - 999	for LEVEL = 0
			1 - 253	for LEVEL = 1
			1 - 29	for LEVEL = 2
	Default value	:	1&&999	for DISPLAY and REGENERATE LEVEL= 0 if DNNOL is missing from command
			1&&253	for DISPLAY and REGENERATE LEVEL=1 if DNNOL is missing from command
			1&&29	for DISPLAY and REGENERATE LEVEL=2 if DNNOL is missing from command
			no node	for DISPLAY and REGENERATE if DNNOL exists in command

DNNOL	Logical destination node
	Logical nodes have been introduced in order to simplify administration of modifications. For denying connections, logical nodes are not allowed. OWN is only allowed for level 0 in numbering plan UNKNOWN and is extracted from KNDEF-Table. The other values (ROW, CDR) are mapped to special node numbers which are not visible at user interface.
	Type of input	:	single value or concatenated values, group member (at least 1) with DNNO for CHANGE, group member (maximum 2) with DNNO for DISPLAY, REGENERATE
	Possible values	:	ROW	llogical node "Rest of World": applies implicitly for all virtual nodes on the level (including own nodes, not CDR) for which no modification is entered for DNNO
			OWN	CHANGE: All virtual nodes which are configured in the "OWN" part of the KNDEF table. DISPLAY/REGENERATE: All virtual nodes which are configured in the "OWN" part of the KNDEF table and which have an entry in the KNMAT table.
			CDR	logical node Charge Data Recording (becomes effective only in call processing for NPI=UNKNOWN)
	Default value	:	ROW&OWN&CDR	for DISPLAY and REGENERATE if DNNO is missing from command
		:	no logical node	for DISPLAY and REGENERATE if DNNO exists in command

LEVEL	Level of the node numbers for modifications or denied connections
	Node numbers consist of up to 3 levels. Each level has its own value range. Higher levels than 0 are used for building up hierarchical networks.
	Type of Input	:	:single value, mandatory for CHANGE single value, range of values, optional for DISPLAY, REGENERATE
	Possible Values	:	0 - 2
	Default value	:	0&&2	for DISPLAY and REGENERATE

MODCON	Modification condition
	Traffic conditions for executing the modifications (NUMEXT, NUMRED) or special modification conditions.
	Type of input	:	single value, concatenated values, group member (at least 1) with CONN, NUMEXT, NUMRED for CHANGE (if NUMEXT or NUMRED are not present in matrix, at least 1 of these parameters must be present in command). NOMOD must not be concatenated with other values.
	Possible values	:	IN	incoming end traffic
			OUT	outgoing traffic
			TRANSH	transit traffic homogeneous
			TRANSI	transit traffic interworking (with change of numbering plan)
			ALL	modifications in all traffic conditions ALL = IN&OUT&TRANSH&TRANSI (special modification conditions are not included in ALL)
			NOMOD	no modification
			REPEXT	special modification condition: The extension number of calling party is replaced by another one (NUMEXT) for connections between originating and destination node, if the calling party has assigned the attribute ONLYEXT in parameter SSTNO (AMOs SCSU, SBCSU, SSCSU,SDAT). Additionally, the appropriate traffic conditions have to be set.(e.g.OUT). The mechanism is shown in example 5 of the ADD action.
			RES1	reserve value 1
			RES2	reserve value 2
	Default value	:	Entry exists: Entry remains unchanged
			Entry does not exist: ALL

MODE	Output control
	Type of input	:	Single value, optional
	Possible values	:	ALL	ALL = Output all denied connections and all connections with station number modification (default)
			DEN	= Output only denied connections
			MOD	= Output only connections with station number modification
	Default value	:	ALL

NPI	Numbering plan identifier (ETSI standard)
	Station number modifications are NPI-dependent, denial of connection function is NPI- independent.
	Type of input	:	single value, optional for CHANGE or concatenated values, optional for DISPLAY, REGENERATE (but mandatory for CHANGE of modifications)
	Possible values	:	ISDN	ISDN-E.164 numbering plan
			PRIVATE	Private numbering plan (PNP)
			UNKNOWN	Implicit numbering plan
	Default value	:	ISDN &PRIVATE &UNKNOWN	for DISPLAY and REGENERATE

NUMEXT	Number extension at the beginning of the station number
	If MODCON=REPEXT the asterisk character * seperates 2 parts of the calling number (see example 5 of ADD action)
	Type of input	:	Single value, group member (at least 1)
	Possible values	:	number consisting of up to 22 digits
			(0-9,*,#,A-D)
			or "*****" to delete the number extension
			or ##### to take over the own codes of the KNDEF table into the KNMAT table (only possible if ONNOL or DNNOL = OWN and NPI=UNKNOWN in LEVEL 0)
	Default value		Entry remains unchanged

NUMRED	Number reduction (truncation) at the beginning of the station number
	If MODCON=REPEXT the asterisk character * seperates 2 parts of the calling number (see example 5 of ADD action)
	Type of Input	:	Single value, group member (at least 1)
	Possible values	:	number consisting of up to 22 digits
			(0-9,*,#,A-D)
			or "*****" to delete the number extension
			or ##### to take over the own codes of the KNDEF table into the KNMAT table (only possible if ONNOL or DNNOL = OWN and NPI=UNKNOWN in LEVEL 0)
	Default value		Entry remains unchanged

ONNO	Originating virtual node number
	Node numbers have level-specific ranges.
	Type of input	:	single value, range or concatenated values, group member (at least 1) with ONNOL for CHANGE, group member (maximum 2) with ONNOL for DISPLAY, REGENERATE
	Possible values	:	1 - 999	for LEVEL = 0
			1 - 253	for LEVEL = 1
			1 - 29	for LEVEL = 2
	Default value	:	1&&999	for DISPLAY and REGENERATE LEVEL= 0 if ONNOL lacks in command
			1&&253	for DISPLAY and REGENERATE LEVEL=1 if ONNOL lacks in command
			1&&29	for DISPLAY and REGENERATE LEVEL=2 if ONNOL lacks in command
			no node	for DISPLAY and REGENERATE if ONNOL exists in command

ONNOL	Logical originating node
	Logical nodes have been introduced in order to simplify administration of modifications. For denying connections, logical nodes are not allowed. OWN is only allowed for level 0 in numbering plan UNKNOWN and is extracted from KNDEF-Table. The other values (ROW, CDR) are mapped to special node numbers which are not visible at user interface.
	Type of input	:	single value or concatenated values, group member (at least 1) with ONNO for CHANGE, group member (maximum 2) with ONNO for DISPLAY, REGENERATE
	Possible values	:	ROW	logical node "Rest of World": applies implicitly for all virtual nodes on the level (including own nodes, not CDR) for which no modification is entered for ONNO
			OWN	CHANGE: All virtual nodes which are configured in the "OWN" part of the KNDEF table. DISPLAY/REGENERATE: All virtual nodes which are configured in the "OWN" part of the KNDEF table and which have an entry in the KNMAT table.
			CDR	logical node Charge Data Recording (becomes ineffective in call processing)
	Default value	:	ROW&OWN&CDR	for DISPLAY and REGENERATE if ONNO lacks in command
		:	no logical node	for DISPLAY and REGENERATE if ONNO exists in command

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.