126.2.1 ADD-KNPRE

This action creates an entry in the node prefix table.

The entry is DPLN-dependent and contains the Numbering Plan Identifier (NPI), the Type of Number (TON), as well as the associated exit codes and the prefixes for the national/international code. If an entry for the specified Numbering Plan Identifier (NPI) and the Type of Number (TON) already exists for the particular DPLN group, the new entry is rejected and an error message output.

Procedure overview


Command code	Parameters
ADD-KNPRE	[DPLN=<number>], \| NPI=ISDN, \| TON=INTERNAT,EXIT=<key-num>,[PREFIX=<key-num>]; \| TON=NATIONAL,EXIT=<key-num>,[PREFIX=<key-num>]; \| TON=SUBSCR,EXIT=<key-num>,[PREFIX=<key-num>]; \| NPI=PRIVATE, \| TON=LEVEL2,EXIT=<key-num>,[PREFIXPREFIX=<key-num>]; \| TON=LEVEL1,EXIT=<key-num>,[PREFIX=<key-num>]; \| TON=LOCAL,EXIT=<key-num>,[PREFIX=<key-num>];

Example:

Create an entry in the node prefix table for DPLN group 1, the numbering plan "ISDN-E.164" and the type of number "International Number" with exit code 0 and 00 as prefix for the international code.

Input:

ADD-KNPRE:1,ISDN,INTERNAT,0,00;

Output:

ADD-KNPRE:1,ISDN,INTERNAT,0,00;
AMO-KNPRE -... ADMINISTRATION OF PREFIX TABLE OF NODE
ADD COMPLETED;

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.