126.2.2 CHANGE-KNPRE

The CHANGE function allows to you modify data entered with ADD.

The table entry is addressed by the DPLN group, the Numbering Plan Identifier (NPI) and the Type of Number (TON); the exit code or the prefix for national/international can be changed. At least on entry to be changed must be specified. The change is indicated by an advisory.

If there is no table entry for the DPLN group, the Numbering Plan Identifier (NPI) and the Type of Number (TON), the change is rejected and an error message displayed.

Procedure overview


Command code	Parameters
CHANGE-KNPRE	[DPLN=<number>], \| NPI=ISDN,TON=<param>,{EXIT=<key-num>, PREFIX=<key-num>}; \| NPI=PRIVATE,TON=<param>,{EXIT=<key-num>, PREFIX=<key-num>};

Example

Change the exit code for DPLN group 1, numbering plan "ISDN-E.164" and type of number "International number" from 0 to 0123.

Input:

CHANGE-KNPRE:1,ISDN,INTERNAT,0123;

Output:

CHANGE-KNPRE:1,ISDN,INTERNAT,0123;
H01: ENRTY FOR DPLN=1, NPI=ISDN, TON=INTERNAT CHANGED:
EXIT: 0 TO 0123, PREFIX: 00 TO 00
AMO-KNPRE -... ADMINISTRATION OF PREFIX TABLE OF NODE
CHANGE COMPLETED;

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.