128.2.2 CHANGE-LANC

The same cross-references exist as for the ADD action. Furthermore, only table entries that have been added can be changed.

Entering a network mask allows you to change the data uniformly for entire networks.

Specifying the IPADRNEW parameter allows you to change an IP address that is already configured (IPADDR parameter).

Procedure overview


Command code	Parameter
CHANGE-LANC	[LTG=<number>],LTU=<number>,SLOT=<number>
	,TABTYPE=GLOBAL,[STNO=<key-num>],[LANHW=<param>]	(1)
	,[ACTNETIF=<param>],[FIREWALL=<param>]
	,[DIALATT=<number>],[PAUSE=<number>]
	,[BYTERATE=<number>],[PACKRATE=<number>]
	,[HIWTRMRK=<number>],[HIWTRTMR=<number>]
	,[LOWTRMRK=<number>],[LOWTRTMR=<number>]
	,[TRACELV=<number>]
	,[ADPISDN=<param>],[ADPELAN=<param>];

	\|,TABTYPE=NETWORK,NETNAME=<param>,[IPADDR=<string>]	(2)
	,[IPNMASK=<string>],[MAXTU=<number>];

	\|,TABTYPE=IPROUTE,IPADDR=<string>,[IPADRNEW=<string>]	(3)
	,[DESTTYPE=<param>],[IPNMASK=<string>]
	,[NEXTROUT=<string>];

	\|,TABTYPE=ISDNTERM,IPADDR=<string>,[IPADRNEW=<string>]	(4)
	,[STNO1=<key-num>],[INOUTCH1=<param>]
	,[STNO2=<key-num>],[INOUTCH2=<param>]
	,[STNO3=<key-num>],[INOUTCH3=<param>]
	,[STNO4=<key-num>],[INOUTCH4=<param>]
	,[HOLDTIME=<number>],[CHBUND=<number>]
	,[BITRATE=<number>],[CALLBACK=<param>];

	\|,TABTYPE=FIREIP,IPADDR=<string>,[IPADRNEW=<string>]	(5)
	,[NETAR=<param>];

	\|,TABTYPE=FIREMAC,IPADDR=<string>,[IPADRNEW=<string>]	(6)
	,[MACADDR=<string>];

Examples

Change WAML station numbers, active network interfaces and the number of dialing attempts in the global parameter table.

Input:

CHANGE-LANC:,2,25,GLOBAL,004325829,,ALL,,6;

Change IP address and packet size for the network interface to the external LAN.

Input:

CHANGE-LANC:,2,25,NETWORK,EXTLAN1,140.1.0.2,,300;

For the entry with IP address 198.1.108.3 in the IP routing table, change the IP address to 198.1.108.0.

Input:

CHANGE-LANC:,2,25,IPROUTE,198.1.108.3,198.1.108.0;

For the entry with IP address 192.168.255.64 in the ISDN remote terminal table, change the usage type for WAML station number 1 and add a second station number with a usage type.

Input:

CHANGE-LANC:,2,25,ISDNTERM,192.168.255.64,,,IN&OUT,03742250868,IN;

For the entry with IP address 192.168.1.3 in the firewall IP address table, change the IP address itself and the network access rights.

Input:

CHANGE-LANC:,2,25,FIREIP,192.168.1.3,140.1.0.9,ATLLAN&EXTLAN1;

For the entry with IP address 192.168.5.1 in the firewall MAC address table, change the IP address.

Input:

CHANGE-LANC:,2,25,FIREMAC,192.168.5.1,140.1.0.10;

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.