128.3 Parameter Description


ACTNETIF	Activate network interface
	Type of input	:	Single value, 2 chained single values, & mandatory (ADD) optional (CHANGE)
	Possible values	:	ATLLAN EXTLAN1 ISDN ALL	ATLANTIC LAN External LAN ISDN network All
	Default value	:	-
ADPELAN	ADP access via external LAN interfaces
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible values	:	PROXY ROUTE	ADP is reached via IP address of WAML interface Atlantic LAN configured as a class C network
	Default value	:	PROXY
	This parameter makes it possible to set the routing method for external LAN interfaces to the Atlantic LAN.
ADPISDN	ADP access via ISDN interfaces
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible values	:	PROXY ROUTE	ADP is reached via IP address of WAML interface Atlantic LAN configured as a class C network
	Default value	:	PROXY
	This parameter makes it possible to set the routing method for external ISDN interfaces to the Atlantic LAN.
BITRATE	Bit rate on B-channel
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible value	:	64 56	64 kbit per second in ISDN direction 56 kbit per second in ISDN direction
	Default value	:	64
BYTERATE	Max. transmission rate: kB / s, Load control ATLANTIC LAN
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible values	:	1-1000
	Default value	:	100
CALLBACK	Callback
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible values	:	y n	Callback required No callback required
	Default values	:	n
CHBUND	Number of channels for channel bundling
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible values	:	1-30 1-2	for S2 connection for S0 connection
	Default value	:	1
DESTTYPE	Type of destination
	Type of input	:	Single value, mandatory (ADD) optional (CHANGE)
	Possible values	:	NET HOST	Destination address in the network Host destination address
	Default value	:	-
DIALATT	Number of dialing attempts
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible values	:	3-127
	Default value	:	5
DISPLV	Level of display
	Type of input	:	Single value, optional (DISPLAY)
	Possible values	:	MOD ALL	Output of modified data All
	Default value	:	ALL
FIREWALL	Firewall check
	Type of input	:	Single value, up to 2 chained single values, & mandatory (ADD) optional (CHANGE)
	Possible values	:	MAC SRCIP ISDN ISDNWOCN ALL NON	MAC address check SRC-IP address check ISDN station number check ISDN network without calling number All No checks
	Default value	:	ALL
	Notice for ISDNWOCN: if set, even connections without calling number are accepted.
HIWTRMRK	High watermark - load (in %) to increase the number of B-channels
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible values	:	60-100
	Default value	:	90
HIWTRTMR	Time (in s) above high watermark before another B-channel is added
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible values	:	5-255 s
	Default value	:	40 s
HOLDTIME	Time (in sec) until an ISDN connection will be released
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible values	:	0, 5-360 s
	Default value	:	30 s
INOUTCH1	Usage of station number 1
	Type of input	:	Single value, up to 2 chained single values, & mandatory (ADD) optional (CHANGE)
	Possible values	:	IN OUT	Use for incoming ISDN number check Station number for outgoing call
	Default value	:	-
INOUTCH2	Usage of station number 2
	Type of input	:	Single value, up to 2 chained single values, & optional (ADD, CHANGE)
	Possible values	:	IN OUT	Use for incoming ISDN number check Station number for outgoing call
	Default value	:	-
INOUTCH3	Usage of station number 3
	Type of input	:	Single value, up to 2 chained single values, & optional (ADD, CHANGE)
	Possible values	:	IN OUT	Use for incoming ISDN number check Station number for outgoing call
	Default value	:	-
INOUTCH4	Usage of station number 4
	Type of input	:	Single value, up to 2 chained single values, & optional (ADD, CHANGE)
	Possible values	:	IN OUT	Use for incoming ISDN number check Station number for outgoing call
	Default value	:	-
IPADDR	IP address (Ex. 192.168.1.4)
	Type of input	:	Single value, mandatory (ADD, CHANGE) optional (ADD:TABTYPE = NETWORK, DELETE, DISPLAY, REGENERATE)
	Possible values	:	15-digit, 0-9 and ’.’
	Default value	:	-
IPADRNEW	IP address (Ex. 192.168.1.4)
	Type of input	:	Single value, optional (CHANGE)
	Possible values	:	15-digit, 0-9 and ’.’
	Default value	:	-
IPNMASK	IP network mask (Ex. 255.255.255.0)
	Type of input	:	Single value, optional
	Possible values	:	15-digit, 0-9 and ’.’
	Default value	:	-
LANHW	Hardware interface for external LAN port
	Type of input	:	Single value, mandatory (ADD) optional (CHANGE)
	Possible values	:	WESTERN COAX AUI	Western-PLUG (10BASET) COAX (10BASE2) CANNON
	Default value	:	-
LOWTRMRK	Low watermark , (% load) to remove b-channels
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible values	:	30-90
	Default value	:	65
LOWTRTMR	Time (in s) below low watermark before removal of B-channel
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible values	:	5-255 s
	Default value	:	30 s
LTG	LTG number
	Type of input	:	Single value, optional (ADD, CHANGE, DELETE, EXEC, DISPLAY, REGENERATE)
	Possible values	:	1
	Default value	:	1
LTU	LTU number
	Type of input	:	Single value mandatory (ADD, CHANGE, DELETE, EXEC, DISPLAY) optional (REGENERATE)
	Possible values	:	1-15, 17-99
	Default value	:	-
MACADDR	MAC address (Ex. 00.6B.8C.CC.9B.7F)
	Type of input	:	Single value, mandatory (ADD) optional (CHANGE)
	Possible values	:	23-digit, 0-9 , A-F and ’.’
	Default value	:	-
MAXTU	Maximum size of a transmission unit
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible values	:	256-1500
	Default value	:	1500
NETAR	Network access rights
	Type of input	:	Single value, up to 3 chained single values, & mandatory (ADD) optional (CHANGE)
	Possible values	:	ISDN ATLLAN INTLAN EXTLAN1 ALL	ISDN network ATLANTIC LAN ATLANTIC LAN without ADP External LAN All
	Default value	:	-
NETNAME	Name of network interface
	Type of input	:	Single value, mandatory (ADD, CHANGE) optional (DELETE, DISPLAY, REGENERATE)
	Possible values	:	ATLLAN EXTLAN1 ISDN1 ISDN2	ATLANTIC LAN External LAN Private ISDN network Public ISDN network
	Default value	:	-
NEXTROUT	Next router IP address (Ex. 195.4.5.1)
	Type of input	:	Single value, mandatory (ADD) optional (CHANGE)
	Possible values	:	15-digit, 0-9 and ’.’
	Default value	:	-
PACKRATE	Max. number of packets/s, Load control ATLANTIC LAN
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible values	:	1-10000
	Default value	:	1000
PAUSE	Pause between two dialing attempts (s)
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible values	:	3-300 s
	Default value	:	90 s
SLOT	Slot number of a LTU
	Type of input	:	Single value mandatory (ADD, CHANGE, DELETE, EXEC, DISPLAY) optional (REGENERATE)
	Possible values	:	1-121	A suitable module must be configured for the slot addressed by PEN (AMO BCSU).
	Default value	:	1
The possible Slot values depend on the systems architecture and can be found in the BCSU AMO description.
STNO	ISDN station number of WAML
	Type of input	:	Single value, mandatory (ADD) optional (CHANGE)
	Possible values	:	22-digit, 0-9
	Default value	:	-
STNO1	ISDN station number 1
	Type of input	:	Single value mandatory (ADD) optional (CHANGE)
	Possible values	:	22-digit, 0-9
	Default value	:	-
STNO2	ISDN station number 2
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible values	:	22-digit, 0-9
	Default value	:	-
STNO3	ISDN station number 3
	Type of input	:	Single value, optional (ADD, HANGE)
	Possible values	:	22-digit, 0-9
	Default value	:	-
STNO4	ISDN station number 4
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible values	:	22-digit, 0-9
	Default value	:	-
TABTYPE	Type of table
	Type of input	:	Single value mandatory (ADD, CHANGE, DELETE, EXEC, DISPLAY) optional (REGENERATE)
	Possible values	:	GLOBAL NETWORK IPROUTE ISDNTERM FIREIP FIREMAC MACADDR ALL	Global parameter table Network interface table IP routing table ISDN remote terminal table Firewall IP address table Firewall MAC address table Display MAC addresses of WAML All
	Default value	:	-
TRACELV	Trace and logging functions
	Type of input	:	Single value, optional (ADD, CHANGE)
	Possible values	:	0-255
	Default value	:	3

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.