130.3.1 ADD-LCSM

There don't exist ASYNCH - or V24 - Lines in a Hipath 4000 V2.0 .


Command Code	Parameter
ADD-LCSM	[UNIT=<param>]
	,MLNTYPE=ASYNC,TYPENO=<number>,BAUD=<number>
	,LEN=<number>,STOPLEN=<param>,TRNSCLK=<param>
	,RCLK=<param>;

	\|,MLNTYPE=V24,TYPENO=<number>,NORM=<param>
	,OPTYPE=<param>,SPEED=<param>,CLK=<param>
	,TIME=<number>,LNTYPE=<param>;

Example

Creation of line data for administration and data module 1 for an asynchronous line.

Input:

ADD-LCSM:A1,ASYNC,1,4800,7,SL1.5,INT,EXT;

Note

The module for the physical line must be present.

Note

If the length of stop has value SL1.5 the value SL1.5 is mapped internally to the value SL1.

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.