130.3.2 CHANGE-LCSM

There don't exist ASYNCH - or V24 - Lines in a Hipath 4000 V2.0 .


Command Code	Parameter
CHANGE-LCSM	[UNIT=<param>]
	,MLNTYPE=ASYNC,TYPENO=<param>,[BAUD=<number>]
	,[LEN=<number>],[STOPLEN=<param>]
	,[TRNSCLK=<param>],[RCLK];

	\,MLNTYPE=V24,TYPENO=<param>,[NORM=<param>]
	,[OPTYPE=<param>],[SPEED=<param>]
	,[CLK=<param>],[TIME=<number>]
	,[LNTYPE=<param>];

Example

Creation of line data for the administration and data module 1 for an asynchronous line.

Input:

CHANGE-LCSM:A1,ASYNC,1,4800,5,SL1,INT,INT;

Note

If the length of stop has value SL1.5 the value SL1.5 is mapped internally to the value SL1.

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.