131.2.5
REGEN-LDAT
For all LCR routes, the data of all associated LCR route elements (LCR priority, trunk groups, outdial rule, LCR authorization) can be regenerated (without specifying a parameter).
For specific LCR routes, the data of all associated LCR route elements can be regenerated by specifying the parameter LROUTE.
Since the route elements do not contain any information about the
sequence in which the elements were ’added’, the REGENERATEd commands may sometimes differ from the original ADD commands for a route.
Procedure Overview
Command Code
Parameter
REGENERATE-LDAT
[LROUTE=<range>] ;
Example
After one of the batches from the ADD example has been executed, the command
Input:
REGEN-LDAT:21;
Output:
results in the second form of the first case (ADD):
ADD-LDAT:21,ALL,1,,71,1,1,,1,EMPTY,NONE,,4,,,,,,,,,,,,;
ADD-LDAT:21,ALL,1,,71,1,2,A&C&HE,1,EMPTY,NONE,,4,,,,,,2&&5,,1-8,,,,;
ADD-LDAT:21,ALL,2,,71,1,2&5&8,,1,EMPTY,NONE,,4,,,,,,,,,,,,;
ADD-LDAT:21,ALL,2,,71,21,2,,1,EMPTY,NONE,,4,,,,,,,,,,,,;
Once route 21 has been deleted, the commands must be entered exactly in the regenerated sequence to arrive at the same result as previously.
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.