131.4.2 Advisories


H01:	LRTEL WITH LVAL <xxxx> WAS INSERTED. THE NUMBERING OF ALL SUBSEQUENT ELEMENTS WAS CHANGED ACCORDINGLY.
H02:	LRTEL <xxxx> WAS SET UP FOR LROUTE <xxxx> WITH LVAL <xxx>.
H03:	LRTEL <xxxx> FOR LROUTE <xxxx> WAS CHANGED.
H04:	LROUTE <xxxx> <TO <xxxx>> HAS NOT BEEN SET UP (AMO RICHT).
H05:	NO ROUTE ELEMENTS HAVE BEEN CREATED FOR LROUTE <xxxx> <TO <xxxx>> AS YET.
H07:	LROUTE <xxxx> <TO <xxxx>> WAS NOT DELETED BECAUSE IT IS STILL ASSIGNED TO AT LEAST ONE LCR DIAL PATTERN (AMO LDPLN).
H08:	LROUTE <xxxx> <TO <xxxx>> WAS DELETED.
H09:	LRTEL <xxxx> <TO <xxxx>> WAS DELETED FROM LROUTE <xxxx> - RESULTING LVAL GAPS ARE ELIMINATED THROUGH RENUMBERING.
H10:	NO ENTRY FOR THE SPECIFIED SEARCH CRITERION.
H11:	THE PARAMETER ZONE MUST BE CHECKED WITH AMO TTBL
H12:	LRTE <xxx> MUST BE DELETED USING LSVC=ALL
H13:	PARAMETER <xxxxx>: THE VALUE NONE IS WITHOUT ANY EFFECT,IF ENTERED IN COMBINATION WITH OTHER VALUES
H15:	ATTRIBUTE:WCHREG(PARAMETER LATTR) IS SET IN LRTG @@@@ LRTGEL @@@@@ BECAUSE PARAMETER ZONE IS NOT EMPTY
H16:	THE PARAMETER ZONE IS SET TO EMPTY IN LRTG @@@@ LRTGEL @@@@@ BECAUSE ATTRIBUTE:WCHREG(PARAMETER LATTR) NOT SET
H17:	LDSRT PARAMETER WAS SET TO EMPTY IN LRTE @@@@ LRTEL @@@@@
H18:	PARAMETER FACILITY WAS SET TO EMPTY SINCE A FACILITY NUMBER IS ONLY VALID FOR SVCVCE=FX OR TTA, OR SVCNVCE=FX OR TTA.
H19:	PARAMETER FACILITY WAS IGNORED SINCE A FACILITY NUMBER CAN ONLY BE ENTERED TOGETHER WITH SVCVCE=FX OR TTA, OR SVCNVCE=FX OR TTA
H20:	A DESTINATION GATEWAY ENTRY WITH ENTERED ROUTING DATA ALREADY EXISTS AND CAN NOT BE CONFIGURED AGAIN.
H21:	PTHE DESTINATION GATEWAY TABLE WAS COMPRESSED, FREE ENRIES HAVE BEEN REMOVED.
H22:	GATEWAY INDEX ^gw1^^bis1^^gw2^^bis2^^gw3^ ^amisare^ DELETED FROM SELECTED ROUTE ELEMENTS
H23:	LROUTE ^lrtg1^^bis^^lrtg2^ WAS NOT DELETED BECAUSE IT IS STILL USED BY AMO LPROF.
H24:	PARAMETER @@@@@@@@: THE VALUE @@@@@@@@ IS WITHOUT ANY EFFECT, IF ENTERED IN COMBINATION WITH OTHER MLPP VALUES
H25:	NOT ALL TRUNKS ENTERED IN RICHT ARE CONFIGURED IN LDAT (LROUTE:@@@@@) TOO THIS CAN LEAD TO PROBLEMS FOR TRUNK B-CHANNEL SEARCH, THIS IS ESPECIALLY IMPORTANT FOR IP-TRUNKING TO WORK !!CORRECTLY.ALL TRUNKS CONFIGURED IN RICHT SHOULD BE ENTERED IN LDAT!!

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.