132.3.1
EXECUTE-LDB
Reload the database of a hardware module. The AMO must be loaded into the appropriate hardware module (parameter UNIT). The parameter LOAD determines whether a hard restart is to be initiated after setting the database inconsistency bit.
Please remember that a load sequence initiated by means of this AMO will necessarily terminate the action abnormally, since the host computer concerned immediately executes a hard restart.
For this reason, the end message
AMO-LDB -... LOAD DATABASE
EXECUTE COMPLETED;
is not output.
Procedure Overview
Command Code
Parameter
EXECUTE-LDB
UNIT=<param>,[LOAD=<param>];
Examples
1.
Load the database of the A1
Input:
EXECUTE-LDB:UNIT=A1;
Output:
H01: A HARD RESTART HAS BEEN INITIATED FOR MODULE A1
2.
Prepare the database of the A1 for the load sequence
Input:
EXECUTE-LDB:UNIT=A1,LOAD=N;
Output:
H02: THE DATABASE FOR THE MODULE A1 HAS BEEN SET TO INCONSISTENT.
INITIATE THE HARD RESTART MANUALLY.
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.