133.2.2 CHANGE-LDPLN

The Change function is used to change the service info of a dialplan number.

The CHANGE function is used to change the data assigned to an existing LCR digit pattern (LCR routes and LCR authorizations per DPLN group, serial pulse counter).

The LCR digit pattern itself can no longer be corrected, nor can the subdivision into fields within the digit pattern be corrected any longer. This can be done only by using DELETE and ADD.

The desired LCR digit pattern may either beeing addressed via parameter LDP or the LCR digit pattern number (parameter LDPNO). If addressing via LDP is used, the digit pattern must be exactly identical.

The assignment of LCR digit pattern number to LCR digit pattern itself is static. When a LCR digit pattern is added, it is assigned some number. This LCR digit pattern number (LDPNO) can be found with DISPLAY.

The LCR route assigned to a DPLN group can be modified, i.e. it can be overwritten with a new valid LCR route, or explicitly disabled for the DPLN group by specifying LCR route 0.

The mandatory LCR authorization of an LCR digit pattern assigned to a DPLN group can be modified (parameter LAUTH).

Procedure Overview

At least one of the parameters DPLN, LROUTE, LAUTH and SPC must be specified.


Command Code	Parameter
CHANGE-LDPLN	LCRCONF=LCRADM,DIPLNUM=<number>,INFO=<string>;

CHANGE-LDPLN	LCRCONF=LCRPATT,DIPLNUM=<number>,{(min1)LDPNO=<number>,LDP=<textstring>}, [DPLN=<range>]
	,{(min1)LROUTE=<range>PROFIDX=<number>GWNO<number>, LAUTH=<range>,
	,SPC=<number>,FDSFIELD=<number>,SDSFIELD=<number>
	,PINDP=<param>};

Example 1

The service info the dialplan 40 is needed to be changed to "lcrservice40"

Input:

CHANGE-LDPLN:LCRADM,40,"LCRSERVICE40";

Example 2

In DPLN group 2, the LCR route of the first digit pattern is to be set to 889 and its corresponding LCR authorization to 4:

Input:

CHANGE-LDPLN:LCRPATT,2,1,,2,889,,,4;

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.