133.2.5 DISPLAY-LDPLN

Branch TYPE=LDP:
All LCR digit patterns can be displayed with their associated data (Dial Plan Number, LCR routes and LCR authorizations per DPLN group, serial pulse counter) (no parameters specified).
Specific LCR digit patterns can be displayed with their associated data (parameter DIPLNUM parameter LDPNO or parameter LDP).
All or specific LCR digit patterns can be displayed with their associated data for specific DPLN groups (parameters DIPLNUM,LDPNO and DPLN).
LCR digit patterns which have been assigned one of the following can also be displayed:
specific LCR routes (parameter LROUTE)
specific LCR authorizations (parameter LAUTH)
specific serial pulse counters (parameter SPC)
In these cases, the range of the LCR digit patterns to be searched can also be limited (parameters LDPNO and DPLN).
Branch TYPE=CD:
All LCR digit patterns are displayed which would be “accessed“ when the in parameter CD specified access code is entered. The corresponding Dial Plan Number (DIPLNU) LCR digit pattern (LDP) and LCR digit pattern numbers (LDPNO) are displayed.
Branch TYPE=STAT:
The actual linear search length in the LCR dialing plan will be calculated and displayed.
Branch TYPE=LCRADM:
All Dial Plan Numbers(except for dial plan number 0) and their attributes (pool number (LWMPOOL, Dial Plan(DIALPLN) and info(INFO) ) can be displayed.
Procedure Overview
 
Command Code
Parameter
DISPLAY-LDPLN
TYPE=LDP,DIPLNUM=<number>,{(max1)LDPNO=<range>,LDP=<string}
 
,{(max1)LROUTE=<range>,PROFIDX=<number>,GWN0=<number>}, [DPLN=<range>]
 
,[LAUTH=<range>],[SPC=<range>];
 
|TYPE=CD,[CD=<keynum>];
 
|TYPE=STAT;
 
|TYPE=LCRADM,DIPLNUM=<number>;
Example 1
All digit patterns which use an LROUTE between 800 and 900 in DPLN groups 2 through 4 are to be displayed:
Input:
DISPLAY-LDPLN:TYPE=LDP,DPLN=2&&4,LROUTE=800&&900;
Output:
+--------------+------------------------------------------------+
| DIPLNUM: 0 | |
| LDPNO : 1 | LDP : 99-XXXX |
| | SPC : 22 |
+--------------+------+--------+-------++------+--------+-------+
| | DPLN | LROUTE | LAUTH || DPLN | LROUTE | LAUTH |
| +------+--------+-------++------+--------+-------+
| | 2 | 889 | 4 || 4 | 888 | 1 |
| | 3 | 888 | 1 || | | |
+--------------+------+--------+-------++------+--------+-------+
Example 2
All LCR digit patterns are to be displayed which are active if the digits 08 are dialed:
Input:
DISPLAY-LDPLN:TYPE=CD,CD=08;
Output:
+----------------------------------------------------------+
| CD 08 ---> |
+-------+--------------------------------------------------+
| LDPNO | LDP |DIPLNUM |
+-------+--------------------------------------------------+
| 28 | 0-89-Z | 5 |
| 35 | 0-8639-Z | 5 |
+-------+--------------------------------------------------+
Example 3
All used dialplan numbers with their attributes are to be displayed :
Input:
DISPLAY-LDPLN:TYPE=LCRADM,DIPLNUM=1&&2047;
Output:
+----------------------------------------------------------+
| DIPLNUM | LWMPOOL | DIALPLAN | INFO |
+---------+------------------------------------------------+
| 1 | 1 | 1 | |
+---------+----------+---------+---------------------------+
| 2 | 1 | 2 | |
+---------+----------+---------+---------------------------+
| 5 | 3 | 40 | LCRSERV5 |
+---------+----------+---------+---------------------------+
| 50 | 8 | 200 | LCRSER200 |
+---------+----------+---------+---------------------------+
| 2000 | 6 | 200 | LCRSER2000 |
+---------+----------+---------+---------------------------+
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.