133.2.6 REGENERATE-LDPLN

All dialplan numbers(except for 0) can be generated with their associated data (LWMpool , Dialplan, Service Info).
All LCR digit patterns can be regenerated with their associated data (LCR routes and LCR authorizations per DPLN group, serial pulse counter) (without specifying a parameter).
However, it is also possible to regenerate specific LCR digit patterns with their associated data (parameter LDPNO, parameter LDP).
Procedure Overview
 
Command Code
Parameter
REGENERATE-LDPLN
DIPLNUM=<number>,{(max1)LDPNO=<range>,LDP=<textstring};
Example1:
All dialplan numbers with their attributes are to be generated:
Input:
REGENERATE-LDPLN:1&&2047;
Output:
ADD-LDPLN:LCRADM,1,1,1;
ADD-LDPLN:LCRADM,2,1,2;
ADD-LDPLN:LCRADM,5,3,40,"LCRSERV5";
ADD-LDPLN:LCRADM,50,8,200,"LCRSERV50";
ADD-LDPLN:LCRADM,2000,6,200,"LCRSERV2000";
Example2:
The first five digit patterns are to be regenerated:
Input:
REGENERATE-LDPLN:,1&5;
Output:
ADD-LDPLN:LCRPATT,0,98-Z,,1,,,2,6;
ADD-LDPLN:LCRPATT,3,99-XXXX,1&2&3&4&5,888,,,1,;
Due to syntactical correctness a LAUTH value 1 will be regeneratet for disabled routes (LRTG=0).
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.