134.4 Error Messages and Advisories

134.4.1 Error Messages


F01:	FDS AND/OR SDS NUMBERS COULD NOT BE ADDED BECAUSE THERE IS NO ENOUGH MEMORY INCREASE MEMORY VIA ADD-DIMSU:LCRDSR=<?>;.
F02:	THE FOLLOWING SDS NUMBERS FOR FDS ^fds^ WERE NOT ADDED TO LDSRT <XX> BECAUSE IT ALREADY EXISTS, OR AN SDS EXISTS THAT COVERS IT, OR AN SDS EXISTS WHICH IS PART OF IT.
F03:	THE FDS <XXXXX> WAS NOT FOUND IN LDSRT <XX>
F04:	THE FOLLOWING SDS NUMBERS FOR FDS <XXXXX> WERE NOT DELETED FROM LDSRT <XX> BECAUSE IT DOES NOT EXIST, OR AN SDS EXISTS THAT COVERS IT, OR AN SDS EXISTS WHICH IS PART OF IT.
F05:	YOU HAVE NOT ENTERED A PROPER VALUE FOR FDS AND/OR SDS,OR THE VALUE RANGE WAS NOT GIVEN IN ASCENDING ORDER. FDS MUST BE IN RANGE [0,99999], MAXIMUM 5 DIGITS AND SDS MUST BE IN RANGE [0,99999999], MAXIMUM 8 DIGITS.
F06:	YOU HAVE NOT ENTERED THE REQUIRED PARAMETERS. BEFORE ENTERING FDS IT IS NEEDED TO SPECIFY LDSRT. BEFORE ENTERING SDS IT IS NEEDED TO SPECIFY LDSRT AND FDS.
F07:	THE FDS <XXXXX> WAS NOT ADDED SINCE IT ALREADY EXISTS IN LDSRT <XX>
F08:	FDS CAN NOT BE ADDED SINCE LDSR TABLE @@ IS FULL (MAX. 16 FDS ENTRIES FOR ONE TABLE )

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.