138.5 Error Messages and Advisories

138.5.1 Error Messages


F01:	ODR NUMBERS LARGER THAN <@@@@>(lwrmax) CANNOT BE PROCESSED (AMO DIMSU, PARAMETER ODR) --> PROMPT ODR
F02:	ODR <@@@@>(lwr) ONLY HAS <@@@@@@>(maxstel) COMMANDS --> PROMPT CMDPOS
F03:	THE PARAMETER CMDPOS MUST BE SPECIFIED WHEN REPLACE=YES --> PROMPT CMDPOS
F04:	ODR <@@@@>(lwr) CAN NOT BE CHANGED BECAUSE IT IS STILL REFERENCED TO BY AT LEAST ONE LCR ROUTE ELEMENT (AMO LDAT) --> NO PROMPT * END AMO
F05:	COEX <@@@@>(coex) DOES NOT YET EXIST (AMO COSSU) --> PROMPT COEX
F06:	ODR <@@@@>(lwr) CAN NOT BE EXTENDED. REASON: THERE IS NO MORE FREE MEMORY (AMO DIMSU) --> NO PROMPT * END AMO
F07:	ODR <@@@@>(lwr) DOES NOT EXIST OR HAS NOT BEEN ADDED --> PROMPT ODR
F08:	ODR <@@@@>(lwr) CAN NOT BE DELETED BECAUSE IT IS STILL REFERENCED TO BY AT LEAST ONE LCR ROUTE ELEMENT (AMO LDAT) --> NO PROMPT * END AMO
F09:	IN ORDER THAT THE ODR <@@@@>(lwr) CAN BE TOTALLY DELETED, THE PARAMETER CMDPOS MUST NOT BE INCLUDED --> NO PROMPT * END AMO
F10:	CMD=END CAN NOT BE DELETED IN ODR <@@@@>(lwr) BECAUSE IT IS STILL REFERENCED TO BY AT LEAST ONE LCR ROUTE ELEMENT (AMO LDAT) --> NO PROMPT * END AMO
F12:	ODR <@@@@>(lwr) HAS ALREADY BEEN ENDED WITH CMD=END AND CAN ONLY BE EXTENDED USING INSERT --> NO PROMPT * END AMO
F13:	THE COMMAND CMD=END CAN NOT BE INSERTED INTO AN OUTDIAL RULE --> NO PROMPT * END AMO
F14:	THE COMMAND CMD=SENDNOW MAY ONLY APPEAR ONCE IN AN ODR --> NO PROMPT * END AMO
F15:	THE COMMAND CMD=NPI CAN NOT BE INSERTED INTO AN OUTDIAL RULE --> NO PROMPT * END AMO
F17:	AN ODR MUST CONTAIN BOTH NPI AND TON BEFORE THE COMMAND CMD=END --> NO PROMPT * END AMO
F18:	THE COMMAND NPI CAN NOT BE CHANGED TO SOMETHING ELSE WHEN THE ODR IS COMPLETE (CMD=END AT END OF ODR) --> NO PROMPT * END AMO
F19:	THE COMMAND TON CAN NOT BE CHANGED TO SOMETHING ELSE WHEN THE ODR IS COMPLETE (CMD=END AT END OF ODR) --> NO PROMPT * END AMO
F20:	OUTCSN/OUTCODE CANNOT BE USED BECAUSE THE FEATURE PACKAGE 'TRUNK/NETWORKING COMFORT' WERE NOT CONTRACTED. PLEASE USE DISP-CODEW FOR DISPLAY OF THE CONTRACTED FEATURE PACKAGES. PLEASE CONTACT YOUR SERVICE CENTER IF YOU WISH TO USE THIS FEATURE.
F21:	not used
F22:	not used
F23:	THE COMMAND NPI CAN NOT OCCURE MORE THAN ONCE IN A ODR
F25:	MAXIMUM NUMBER OF INFO FIELDS ARE USED, NUMBER HAS TO BE INCREASED BY MEANS OF ADD-DIMSU:INFO=<?>;
F26:	NOT ENOUGH MEMORY FOR INFO FIELD IN DATAPOOL TO WRITE THE INFO. INCREASE BY MEANS OF ADD-DIMSU:DPINFO=<?>;
F27:	INFO INDEX OUT OF RANGE
F28:	THE SERVICE INFORMATION (PARAM INFO) HAS NOT BEEN ENTERED DUE TO LACK OF LWR:@@@@.
F29:	The maximal amount of CMD's in an ODR is 100. For further modification set REPLACE to YES.

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.