143 LSSM - Switch Circuit or Line in the Server


Restrictions	Functions of the AMO	Error Messages and Advisories
Interrelationships	Parameter Description

The AMO LSSM (Line Switch of Service Modules) is used to place into service or remove from service the specified line or specified channel of a line. This requires that the hardware already be allocated and that a channel already be created.

According to the module type the physical line termination units can be assigned as following:

The first 2 line-numbers (out of 8) are valid for the 2 line termination units.

The PSIO will not be marketed any longer.

The following shows the sequence of the physical lines on a modul:

1. Delta-channel

no valid channel

1. B-channel of the 1. Delta-channel

2. B-channel of the 1. Delta-channel

2. Delta-channel

no valid channel

1. B-channel of the 2. Delta-channel

2. B-channel of the 2. Delta-channel

TCP - Line 1 up to TCP - Line 6 can be switched.

The messages of dependability, which are the results of a test, are not output via AMO LSSM. These messages are displayed directly on the output device of dependability.

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.